martno1fan

Has too many stickers allready in my opinion.
Mart

Rebel bay

This is the same than scale 1

martno1fan

Still too many stickers just not my taste at all but not my boat

Rebel bay

I received the SUXFLY4092 930kV motors and HRC water jackets from OSE.

martno1fan

Rebranded TP motors and those look like car motors not boat, wires out the side is dead giveaway

Rebel bay

The design of the FOUNTAIN is finished, I don' t know if I will apply a clear coat

Rebel bay

Ireceived the motors , 4092-3Y-930kV

Rebel bay

A friend made those motor mounts. I will make new holes to center HRC water jackets.Caps bank are made with 1000µF/63 Volts

Rebel bay

What power do I need for the servo rudder?

martno1fan

I allways use 12-15 kg metal geared servos on 6 volts.
Mart

Rebel bay

Thank you Mart

martno1fan

I also us a y lead to make sure the servo gets the full 6 volts,i use these on my 58 Apaches,any decent quality servo will work just make sure its metal geared.
Mart

axel2

Hi how is the progress and can you tell me who is the manufacturer of the hull?

Thanks
Axel