energy

+1^ too

I have seen lots of homemade ride plates here. Would anyone take a run at making some and then selling them? I would buy one at a pretty penny. I think a ride plate with a built in grate would be really cool and not that much more work.

MaximuM*AltitudE

For sure impellers! I had to order a bunch of the Graupners from CMB because I shattered a stock one. [] Make a decent replacement that didn't cost $50 and you'd have a winner!

energy

I was just in touch with him, and he said he will be ready to ship to north america by May!

hamnet

My Feedback: (3)

NICE!

xz1gsw

Ok mine came in the mail last night. Took everything out so next is paint then to oder everything I need for it. hope to find some people near me to run with.

mickieb49

Any Joy with these upgrade kits? like a contact details?
Thinking on doing up my Graupner jetsprint.
Mick

borisp_russia

Hello from Russia !
It's very intresting forum for me , because i love boat& fishing
i want buy NQD jet boat and mod it
i have some problem to realize my dreams!

1. I can't buy stock jet boat in Russia (i found on ebay in UK )
2. i need list of mods ( prefer hobby kings )

so questions

What i need to made fast boat ?
engine
engine control
remote control
servo
batt
charge

sorry for my english

skype: djpokrovskiy


best regards

similar

Хорошее утро.

borisp_russia

Yes

Да

QIK-RX4

Зде�ь вы идете Mate:

Двигател�

http://www.hobbyking.com/hobbyking/s...idProduct=8595
http://www.himodel.com/electric/SEAK...at_2040SL.html

Ð*лектронный регулÑ�тор Ñ�короÑ�ти

http://www.hobbyking.com/hobbyking/s...idProduct=7360
http://www.himodel.com/electric/Seak...ng_system.html

2.4gig радио

http://www.hobbyking.com/hobbyking/s...dProduct=10608
http://www.hobbyking.com/hobbyking/s...dProduct=16199
http://www.himodel.com/radios/IMAXRC...t_IR-GT3B.html

Сервопривод управлени� рулем

http://www.hobbyking.com/hobbyking/s...idProduct=8303
http://www.himodel.com/radios/PowerH...HD-1705MG.html

Lipo батареи

http://www.hobbyking.com/hobbyking/s...dProduct=10278
Ð*то Lipo даÑ�Ñ‚ вам около 10 минут во времÑ� выполнениÑ�. Может быть, больше, в завиÑ�имоÑ�ти от того, как быÑ�тро вы запуÑ�тите.

Соединители дл� батарей дл� Евровидени�

http://www.hobbyking.com/hobbyking/s...idProduct=9572

Пробка дл� охлаждени� воды линий.

http://www.hobbyking.com/hobbyking/s...idProduct=7578

Lipo зар�дное у�трой�тво.

http://www.hobbyking.com/hobbyking/s...dProduct=12104


Я думаю, что покрывает в�е �то.двигатель ра��читан до 3s LiPo, но � жареные мо� в течение 10 минут на 3s. Так что они безопа�ны дл� Lipo 2s.воды забрать можно �делать от �труи блок, имеют про�матривать �ту тему дл� фотографий.2s Lipo также впи�ывает�� в STD лоток аккумул�тор, который вырезали из верхней ча�ти лодки. Я гор�чий клееного шахте в нижней по�тому мой Lipo имеет хорошее ме�то, чтобы �идеть. Извините за мой плохой ру��кий, � и�пользовал Google Translate.

�адею�ь, что �то помогает.
Ура,
Ð*оберт.

QIK-RX4

Well here is my Jetboat so far. I ran out of paint, hence why the bottom is still white. ATM it has a 4300kv in it on 2s, but as soon as HK get the 4800kv back in I will be replacing it.

I am also waiting for the upgrade kit that is meant to be comming out sometime soon. So I should have a nice ride plate if I can get my hands on one.

What you guys think?







Cheers,
Rob.

SpeedDaemon

Awesome! I like how those waterhoses kind of ... overwhelms the tiny motor It shows though You've built a boat or two before.

borisp_russia

Thanx )
for help!

xz1gsw

looks great . where did you get the top of the motor looking for something for mine

Ron

QIK-RX4

Its off the Tamiya clod buster.

http://cgi.ebay.com.au/ws/eBayISAPI....=STRK:MEWNX:IT


Thanks for the comments guys. Its my first jetboat build.

xz1gsw

Here is my boat so far still have to come up with headers and intake and I don't have any of the runnung gear yet.

energy

Thats looks great man!

MaximuM*AltitudE

Dude upgrade kits are gonna be available?!? I'm so in for 3 or 4 of them!

4mods

Hey guys, I did some testing of a grate I had put on my boat, I think I will replace it though with brass rods instead. I was lost to much speed/power for what it was worth.

http://www.youtube.com/watch?v=0nIqQw1-isc

sundogz

I knew it would be - you were using expanded metal with openings that were too small. Go to the office supply section of Wal-Mart and look for the screen and mesh type file organizers. You want something with openings larger than the metal itself (larger than you used previously). One organizer will make over 20 rock guards (give them to your friends). Or find some screening with larger openings like I have on mine (see below).

4mods

Excellent, thanks for the tip. I think I will just use what I have for now (brass strands) but one of those metal organizers will be on my next build for sure!

MaximuM*AltitudE

That's the same stuff I used on my grate, should be able to test it tomorrow.

My MR200 Spektrums also arrived finally, no more crap AM Axial radio! Woop!

MaximuM*AltitudE

I've still got a leak somewhere around the pump in my Kal-Gard boat, static I can leave it in the sink forever and it doesn't leak a drop, but as soon as I give it throttle it starts leaking. I haven't pinpointed where it's coming from, but it seems like right at the back of the pump in the transom. Must not be sealed to the hull completely.. Either way I'm running it, it's not a huge leak, but probably enough to drain it once or twice a pack.

sundogz

I bet it's coming in around the shaft. Next time it's apart, superglue the 'O' ring in place (after cleaning its seat), and push sticky (thick) grease into the bore and smear some on the shaft before re-insertion. That will clear most of it up. And leave a piece of sponge (the hard dry kind) in the bottom at the transom to catch the small stuff. Consider buying a dollar water pistol and using it's stopper for a drain plug. Put it on top of the hull at a corner. Be careful to make a clean, circular hole so it will seal well.

MaximuM*AltitudE

That is good advice, I'll look into doing that. I do know that some gets in through the shaft, I'll re-grease it tonight and glue the bushing in place.

Hopefully it's not forcing it's way in through the transom, I was just thinking about that. Possibly the force of wash is getting in right where the stator bolts to the pump..Time to get crazy with the Marine Goop!