Delta Force Sniper 23 RTR
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Abbotsford,
BC, CANADA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Delta Force Sniper 23 RTR
First Impressions of my newly arrived DF Sniper RTR.
The overall length with the hardware comes in at 26". The hull itself is 23"x6.75". This is essentially a scaled down version of the big brother "the Sniper 44" with the same deep vee. The hull itself is fiberglass. The finish is nice, clear coat over paint and decals. I didn't expect anything less coming from DF. The kit that I choose was the Ghost Fire version. The hatch has a pin in the front and two magnets at the rear of the hatch. Very well though out. Opening the hatch, there is a clear plastic sub-hatch which needs to be taped down to keep water out from entering the hull. Before we get inside to the components - just to go over the running hardware. The Sniper RTR comes with 2 turn fins, 2 trim tabs, a stinger drive (non-adjustable) and a rudder with dual water pickups.
Moving inside the hull, it comes with a 2200 kv water cooled outrunner motor. And a water cooled 45A esc. The recommended power supply is 11.1V lipo (2200mah up to 2500mah). The reason for this is the battery tray is 5" x 3" wide. So if you're running 5000mahs lipo's you will need to do some wood working to make your pack fit. The prop that comes with the kit is a 30mm x 1.4 pitch in carbon. I have not run my sniper yet, but I seen that the gps speed is 22 mph out of the box stock.
Link to video - Thanks to tiqueman! http://www.youtube.com/watch?v=QGp-i7CUaog
The Sniper RTR comes in 4 different schemes. This is a strong contender in the RTR ranks.
The overall length with the hardware comes in at 26". The hull itself is 23"x6.75". This is essentially a scaled down version of the big brother "the Sniper 44" with the same deep vee. The hull itself is fiberglass. The finish is nice, clear coat over paint and decals. I didn't expect anything less coming from DF. The kit that I choose was the Ghost Fire version. The hatch has a pin in the front and two magnets at the rear of the hatch. Very well though out. Opening the hatch, there is a clear plastic sub-hatch which needs to be taped down to keep water out from entering the hull. Before we get inside to the components - just to go over the running hardware. The Sniper RTR comes with 2 turn fins, 2 trim tabs, a stinger drive (non-adjustable) and a rudder with dual water pickups.
Moving inside the hull, it comes with a 2200 kv water cooled outrunner motor. And a water cooled 45A esc. The recommended power supply is 11.1V lipo (2200mah up to 2500mah). The reason for this is the battery tray is 5" x 3" wide. So if you're running 5000mahs lipo's you will need to do some wood working to make your pack fit. The prop that comes with the kit is a 30mm x 1.4 pitch in carbon. I have not run my sniper yet, but I seen that the gps speed is 22 mph out of the box stock.
Link to video - Thanks to tiqueman! http://www.youtube.com/watch?v=QGp-i7CUaog
The Sniper RTR comes in 4 different schemes. This is a strong contender in the RTR ranks.
#5
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Abbotsford,
BC, CANADA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
SRT10,
I have a brand new in box Sniper RTR in the America Champ colors for sale. 45A esc, 2200 KV motor, all water cooled. Just add your rx and batteries. Runs off 3s lipos BTW. Interested? Asking $225 plus actual shipping.
I have a brand new in box Sniper RTR in the America Champ colors for sale. 45A esc, 2200 KV motor, all water cooled. Just add your rx and batteries. Runs off 3s lipos BTW. Interested? Asking $225 plus actual shipping.
#6
RE: Delta Force Sniper 23 RTR
Reminds me of the Thunder Tiger Outlaw: http://www.tiger.com.tw/product/5121-A22.html http://www.youtube.com/watch?v=scsI_WZAUVw
#7
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: MsDarla
Reminds me of the Thunder Tiger Outlaw: http://www.tiger.com.tw/product/5121-A22.html http://www.youtube.com/watch?v=scsI_WZAUVw
Reminds me of the Thunder Tiger Outlaw: http://www.tiger.com.tw/product/5121-A22.html http://www.youtube.com/watch?v=scsI_WZAUVw
he ran a race with it and it handled the chop awesome
#8
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: westbeach
SRT10,
I have a brand new in box Sniper RTR in the America Champ colors for sale. 45A esc, 2200 KV motor, all water cooled. Just add your rx and batteries. Runs off 3s lipos BTW. Interested? Asking $225 plus actual shipping.
SRT10,
I have a brand new in box Sniper RTR in the America Champ colors for sale. 45A esc, 2200 KV motor, all water cooled. Just add your rx and batteries. Runs off 3s lipos BTW. Interested? Asking $225 plus actual shipping.
#9
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Abbotsford,
BC, CANADA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Yup, I bought 2 boats, one for myself and one for friend. Unfortunately he had to fixed his truck >$$$ . So what was his is now up for sale. It is 180 plus half the cost of shipping from HK. I am selling this for what I paid. Not making anything off the sale. Just need to sell it off. I got the boat at dealer costs for a one time deal only. You won't find these boats for $180 anywhere. If you want you can contact Delta force, and they will sell this to you for $300 plus shipping.
#10
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: westbeach
Yup, I bought 2 boats, one for myself and one for friend. Unfortunately he had to fixed his truck >$$$ . So what was his is now up for sale. It is 180 plus half the cost of shipping from HK. I am selling this for what I paid. Not making anything off the sale. Just need to sell it off. I got the boat at dealer costs for a one time deal only. You won't find these boats for $180 anywhere. If you want you can contact Delta force, and they will sell this to you for $300 plus shipping.
Yup, I bought 2 boats, one for myself and one for friend. Unfortunately he had to fixed his truck >$$$ . So what was his is now up for sale. It is 180 plus half the cost of shipping from HK. I am selling this for what I paid. Not making anything off the sale. Just need to sell it off. I got the boat at dealer costs for a one time deal only. You won't find these boats for $180 anywhere. If you want you can contact Delta force, and they will sell this to you for $300 plus shipping.
and then again I really don't want a 20mph boat
#11
RE: Delta Force Sniper 23 RTR
Hello, after the Beijin expo we decided to adjust our retail price to USD250 plus shipping cost as we want more people to enjoy our boat.
CY
Deltaforce Hobby
[email protected]
CY
Deltaforce Hobby
[email protected]
#12
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
These are great boats and for $12 you could drop in a Typhoon 2218 3600kv motor in there and it would be very fast!
Fit and finish they are beautiful. Great for relaxing. I would have bought the one from Westbeach if I was working.
Fit and finish they are beautiful. Great for relaxing. I would have bought the one from Westbeach if I was working.
#13
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Remember the TT boat is dead slow for $400, big boat though, crappy motor. At least you won't burn the motor out of this thing.... well...
#14
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: BACKEMF
These are great boats and for $12 you could drop in a Typhoon 2218 3600kv motor in there and it would be very fast!
Fit and finish they are beautiful. Great for relaxing. I would have bought the one from Westbeach if I was working.
These are great boats and for $12 you could drop in a Typhoon 2218 3600kv motor in there and it would be very fast!
Fit and finish they are beautiful. Great for relaxing. I would have bought the one from Westbeach if I was working.
isn't that the motor for a Trex-450?
#15
RE: Delta Force Sniper 23 RTR
For 23â€Sniper RTR, we just put the electronics stuff which are suitable for beginner. But we can make it faster by using high KV motor and large Amp ESC so the Sniper can run . We tried 6S battery which can put the boat like a rocket but stable. Hope you enjoy it.
CY
Deltaforce Hobby
[email protected]
CY
Deltaforce Hobby
[email protected]
#16
Senior Member
My Feedback: (1)
Join Date: Sep 2004
Location: KitchenerOntario, CANADA
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: cyhohk
For 23â€Sniper RTR, we just put the electronics stuff which are suitable for beginner. But we can make it faster by using high KV motor and large Amp ESC so the Sniper can run . We tried 6S battery which can put the boat like a rocket but stable. Hope you enjoy it.
CY
Deltaforce Hobby
[email protected]
For 23â€Sniper RTR, we just put the electronics stuff which are suitable for beginner. But we can make it faster by using high KV motor and large Amp ESC so the Sniper can run . We tried 6S battery which can put the boat like a rocket but stable. Hope you enjoy it.
CY
Deltaforce Hobby
[email protected]
What is the max voltage rating of the stock controller and motor??
#17
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
If I am to correctly infer from his simple english translation, is that he or they have tried it on lipo up to 6S and it is silly fast. I also infer that it is using the inexpensive Suppo/himodell type esc which are normally 2-6S. If you fry the esc John, it may cost you all of $12 for a nice really smooth Plush 30amp esc.
John, you're just chicken to try 4S like I keep suggesting.
John, you're just chicken to try 4S like I keep suggesting.
#18
RE: Delta Force Sniper 23 RTR
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
CY
#19
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: cyhohk
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
http://www.deltaforcehobby.com/rtr06.html
and do you make a kit version without motor and esc?
thanks!
#20
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: srt10
how much is the plug and play 32'' Cyber Storm?
http://www.deltaforcehobby.com/rtr06.html
and do you make a kit version without motor and esc?
thanks!
ORIGINAL: cyhohk
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
http://www.deltaforcehobby.com/rtr06.html
and do you make a kit version without motor and esc?
thanks!
Same boat.... Basically
Weird, Hobby King now has pop up s that offer some products I have been watchingt, at a discount price! Man, they just offered me the price of $211 for the pursuit...
#21
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: cyhohk
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
Every time I email you to ask about a KIT or ASSEMBLE version of the DF23 you just tell me the RTR is $250 + shipping.
I build my own boats, I like your kit. Why will you not sell me a kit if you advertise it? VERY BAD delta force!!! Very bad.
I own DF 33" and I did own DF 25" but sold it.
I am a good customer, why will you not sell me your product?
Can I get kit PLEASE!!!
Maybe 2? How much for 10? I can sell them at Toronto Hobby Show in October or have you got a Canadian Sales Rep. for that already???
#22
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: BACKEMF
You mean this boat? Here it is.... http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=11853&Product_Name=Pursuit_Brushless_V-Hull_R/C_Boat_(820mm)_Plug-n-Drive
Same boat.... Basically
Weird, Hobby King now has pop up s that offer some products I have been watchingt, at a discount price! Man, they just offered me the price of $211 for the pursuit...
ORIGINAL: srt10
how much is the plug and play 32'' Cyber Storm?
http://www.deltaforcehobby.com/rtr06.html
and do you make a kit version without motor and esc?
thanks!
ORIGINAL: cyhohk
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
http://www.deltaforcehobby.com/rtr06.html
and do you make a kit version without motor and esc?
thanks!
Same boat.... Basically
Weird, Hobby King now has pop up s that offer some products I have been watchingt, at a discount price! Man, they just offered me the price of $211 for the pursuit...
#24
RE: Delta Force Sniper 23 RTR
Really sorry for my late reply. For 32" Storm RTR we sell it USD373 including motor, ESC, 9kg Servo. We have two pattern now. Red indian and Ghost Fire. May I ask you need FRP with colourful pattern or gel coat?
CY
CY
#25
RE: Delta Force Sniper 23 RTR
Further more, we are now producing assemble version for the 23" Sniper with gel coat colour, full yellow, upper yellow lower white, Full white. The kit comes with all hardware. The hardware is same as RTR. Also we will attach some simple pattern sticker in the kit.
We have no agent in Canada at the moment. You are welcome to cooperate with us with your sales force.
Again, I apologise to all the customers with my late reply. Pls give me your idea dealer price which can get the market share in your place. Can sent it to my email: [email protected]
As there are lot of copy cat in China so we need to adjust our price to compet with. Also it is one of reason we do RTR. Also all our boat are being sold by ourself and one of HK model shop only. So we are appreciated to those party who has interested to become our distributor.
Pls kindly give us your opinion what we can/should cooperate.
tks
CY
We have no agent in Canada at the moment. You are welcome to cooperate with us with your sales force.
Again, I apologise to all the customers with my late reply. Pls give me your idea dealer price which can get the market share in your place. Can sent it to my email: [email protected]
As there are lot of copy cat in China so we need to adjust our price to compet with. Also it is one of reason we do RTR. Also all our boat are being sold by ourself and one of HK model shop only. So we are appreciated to those party who has interested to become our distributor.
Pls kindly give us your opinion what we can/should cooperate.
tks
CY