Delta Force Sniper 23 RTR
#26
RE: Delta Force Sniper 23 RTR
Hello, we can do it for you without motor and esc. We have two patterns. Red Indian and Ghost Fire. Perhaps you can choose gel coat version with our hardware. The hardware is same as RTR version.
I apologise to my mistake and late reply. I will do my best to give you service.
tks
CY
I apologise to my mistake and late reply. I will do my best to give you service.
tks
CY
#27
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Abbotsford,
BC, CANADA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Hi Cy,
It is nice to see you on this forum, after I posted my opinion on the Sniper 23 RTR. I am a little dissapointed that you have not returned any of my emails after you informed of the 2.4Ghz module that you have. If you are looking for a distributor for DF in Canada, maybe I can help. Please email me. Thanks
Neal
It is nice to see you on this forum, after I posted my opinion on the Sniper 23 RTR. I am a little dissapointed that you have not returned any of my emails after you informed of the 2.4Ghz module that you have. If you are looking for a distributor for DF in Canada, maybe I can help. Please email me. Thanks
Neal
#28
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Delta force makes a superior hull to other chinese copy cats...
I would like a sniper23 assemble kit in full Yellow, and maybe a 45" Sniper too, in orange Please CY!!!!
Go for it WestBeach...
I would like a sniper23 assemble kit in full Yellow, and maybe a 45" Sniper too, in orange Please CY!!!!
Go for it WestBeach...
#29
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: srt10
how much is the plug and play 32'' Cyber Storm?
http://www.deltaforcehobby.com/rtr06.html
and do you make a kit version without motor and esc?
thanks!
ORIGINAL: cyhohk
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
we have made two colours pattern. Pls go to our website www.deltaforce-hk.com. It shows the pattern and we tested in HK small pond with video.
CY
http://www.deltaforcehobby.com/rtr06.html
and do you make a kit version without motor and esc?
thanks!
So how much for the kit? [:-]
#30
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Abbotsford,
BC, CANADA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Yeah, I would if they would be so polite as to reply my emails. I don't know why I have such patience. Oh yeah..their boats rock!!
ORIGINAL: BACKEMF
Go for it WestBeach...
Go for it WestBeach...
#31
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Import me an orange 45" Sniper please... No rush, winter project.... maybe if I can keep off the trigger of some other big mono...
#32
RE: Delta Force Sniper 23 RTR
Hi Neal, sorry for my delay and delay your email. As we have to reorganise our biz model so that we have to "tidy up" our company before we can do biz. such as RTR price setting, production, Beijin Expo, etc. We set up our own factory in China Dongguan now.
I surely will give you a photo of the 2.4G module later. We have new version.
tks
CY
I surely will give you a photo of the 2.4G module later. We have new version.
tks
CY
#33
RE: Delta Force Sniper 23 RTR
Hello , thank you for your understanding. By the way, how many 44" Sniper Hull you need? We have to mould for you. You need the hardware as well if we can provide?(not available now.)
tks
CY
tks
CY
#34
#35
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Abbotsford,
BC, CANADA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Hello Cy,
Good to hear back from you. I will let you settle into your newly organized company. But I would like to talk about your dealership for Canada.
Regards,
Neal
Good to hear back from you. I will let you settle into your newly organized company. But I would like to talk about your dealership for Canada.
Regards,
Neal
ORIGINAL: cyhohk
Hi Neal, sorry for my delay and delay your email. As we have to reorganise our biz model so that we have to ''tidy up'' our company before we can do biz. such as RTR price setting, production, Beijin Expo, etc. We set up our own factory in China Dongguan now.
I surely will give you a photo of the 2.4G module later. We have new version.
tks
CY
Hi Neal, sorry for my delay and delay your email. As we have to reorganise our biz model so that we have to ''tidy up'' our company before we can do biz. such as RTR price setting, production, Beijin Expo, etc. We set up our own factory in China Dongguan now.
I surely will give you a photo of the 2.4G module later. We have new version.
tks
CY
#36
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Good to hear Neal.
I decided that I don't need a 45" hull. I think a 41" will do fine.
I'll wait until you get set up and then get a hull for a winter project.
Now the 23" KIT or as CY says, Assemble, has to be less than $250, c'mon... it's only 23" long...
I decided that I don't need a 45" hull. I think a 41" will do fine.
I'll wait until you get set up and then get a hull for a winter project.
Now the 23" KIT or as CY says, Assemble, has to be less than $250, c'mon... it's only 23" long...
#37
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Abbotsford,
BC, CANADA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
Ray, there must be a typo for the Assemble kit 23 Sniper. It must be shipped for that price. Cy can you please clarify this please??
ORIGINAL: BACKEMF
Good to hear Neal.
I decided that I don't need a 45'' hull. I think a 41'' will do fine.
I'll wait until you get set up and then get a hull for a winter project.
Now the 23'' KIT or as CY says, Assemble, has to be less than $250, c'mon... it's only 23'' long...
Good to hear Neal.
I decided that I don't need a 45'' hull. I think a 41'' will do fine.
I'll wait until you get set up and then get a hull for a winter project.
Now the 23'' KIT or as CY says, Assemble, has to be less than $250, c'mon... it's only 23'' long...
#38
RE: Delta Force Sniper 23 RTR
Hello friends, RTR 23" Sniper has come to be the first RTR product in our factory. It comes with motor (2200kv), ESC (45A), and servo. USD250 is a price of RTR. FOr assemble version, we have two types, First type, Gel coat colour. Second type, FRP (same as RTR version pattern). Gel coat version is cheaper as the production process is less than FRP version.
Both versions include hardware. Pls let us know you need us to provide electronics in assemble version or not. We need to give you a cheaper price for it if you don't need it.
tks
CY
Both versions include hardware. Pls let us know you need us to provide electronics in assemble version or not. We need to give you a cheaper price for it if you don't need it.
tks
CY
#42
RE: Delta Force Sniper 23 RTR
Hi, I am still there. But we want to ship the boat without motor, ESC,servo as we don't want to carry these items. We found some customers want to use their own more "stronger" system then ours. So we are now considering this point now.
CY
CY
#44
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Delta Force Sniper 23 RTR
ORIGINAL: cyhohk
Hi, I am still there. But we want to ship the boat without motor, ESC,servo as we don't want to carry these items. We found some customers want to use their own more ''stronger'' system then ours. So we are now considering this point now.
CY
Hi, I am still there. But we want to ship the boat without motor, ESC,servo as we don't want to carry these items. We found some customers want to use their own more ''stronger'' system then ours. So we are now considering this point now.
CY