RCU Forums - Hunter 69"

RCU Forums (https://www.rcuniverse.com/forum/)

- Speed - Electric (https://www.rcuniverse.com/forum/speed-electric-109/)

- - Hunter 69" (https://www.rcuniverse.com/forum/speed-electric-109/11199642-hunter-69%22.html)

Yes, two 6S 5000mAh wired in parallel, Seaking 180A and Castle Creations 1717 formy 39" deep vee

http://img14.imageshack.us/img14/593/temp374.jpg

Hey srt10, put some vids of your boat when done, wish to see the 56102 in action!!
Rebel, who builds that outerlimits hull? Is there a bigger version?

Mart, did you get my message?

Hi Mario yea sory been busy wil reply now lol.
Mart

Quote:

ORIGINAL: Mario Giordano

Hey srt10, put some vids of your boat when done, wish to see the 56102 in action!!
Rebel, who builds that outerlimits hull? Is there a bigger version?

Mart, did you get my message?

got the Sordfish HV240 esc two days ago for it :D

My Rapid is made by MMP The bigger model is the Watersnake with the same design www.mmproducts.cz/products/models/13-watersnake/

The MMP Watersnake is 55" long, here is an OUTERLIMITSreplica

http://img201.imageshack.us/img201/1156/temp375.jpg

Hi rebel, i had seen that page some time ago, but is too far from me to buy a big hull, that's why I took the hunter here in europe, anyway that in the pic istheir fountain, nice boat but too narrow and has a very small transom in my opinion, but they have a magnificent Outerlimits hull, the 70" SV, and also stepped, i think if someone was selling it here in europe would make the real deal!! Well, mhz is almost to launch their new lucas oil hull, in 1,5 metres size, we all know that one of the lucas oil boats is an outerlimits, so maybe mhz guessed whatboaters wanted, we shall see, the release date is end of October.

Regards

And MMProducts? They build hulls for Hydro Marine and for MHZ, they are located in Czechoslovakia; I bought my Rapid to MMP, this model is called Racemaster at MHZ, this is the same hull, only the name change, and the price too MHZ is more expensive

Edit What do you think about the design of my Rapid made with custom stickers? I mean too much decals or something bad looking... Thanks

.

Quote:

ORIGINAL: Rebel bay

My Rapid is made by MMP The bigger model is the Watersnake with the same design www.mmproducts.cz/products/models/13-watersnake/

Says $6240 [X(]??

I have a 56" cat and I'm running twin Twin SSS5694 motors and Fliermodel 280 amp esc's this will set you back 100.00 for each motor and 180.00 each esc. I also have the Proteus X524's that I will be trying as well.
http://i628.photobucket.com/albums/u...cture013-1.jpg

This could be my next build! It's the Fountian of centralrcmarine or Mystic both are nice and big!