Prather Funcruiser Turbine powered !
#1
Junior Member
Thread Starter
Prather Funcruiser Turbine powered !
As the weather here in the UK has been terrible I have been in my workshop putting a turbine powered Funcruiser together for a bit of fun this summer. Turbine will probably be a Wren 70 I have spare .
The hull mouldings were taken many years ago and originally started as a Funcruiser .
I will upload photos when rc universe allows
The hull mouldings were taken many years ago and originally started as a Funcruiser .
I will upload photos when rc universe allows
Last edited by euan galloway; 03-16-2019 at 02:42 PM.
#2
My Feedback: (3)
Sounds an interesting project! I have a "Jetcruiser" which was a variation of the Prather hull with a flattened vee that incorporated an MHZ Water jet.
Regarding image restrictions - it is something the site owners have put in place due to a large amount of spammers. I am not sure how long before posting is available but if you like just shoot me a PM with images and I can upload to your post.
Regarding image restrictions - it is something the site owners have put in place due to a large amount of spammers. I am not sure how long before posting is available but if you like just shoot me a PM with images and I can upload to your post.
Last edited by Justaddwata; 03-16-2019 at 10:07 PM.
#3
Junior Member
Thread Starter
Many thanks for the offer I will attempt to send the photos via a pm, I have been a member on the site for many years but for some reason it would not generate a new password link so I just re joined.
I Used my name Euan in the past and contributed to various threads but changed e mail address and never got back on .
I have opened TROUBLE TICKET 32921 to try and link the old and new if as a mod you can help that would be great
thanks Euan.
I Used my name Euan in the past and contributed to various threads but changed e mail address and never got back on .
I have opened TROUBLE TICKET 32921 to try and link the old and new if as a mod you can help that would be great
thanks Euan.
Last edited by euan galloway; 03-17-2019 at 12:54 AM.
#5
Join Date: Dec 2008
Location: Ocala, Fl
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Euan,
You old account,
http://www.rcuniverse.com/forum/members/euan.html
You can send pic by PM if you post links from pic programs available all over for free.
Imgur is the best one IMO.
This was a link posted in the reply. Once you save or send then it becomes a picture.
You old account,
http://www.rcuniverse.com/forum/members/euan.html
You can send pic by PM if you post links from pic programs available all over for free.
Imgur is the best one IMO.
This was a link posted in the reply. Once you save or send then it becomes a picture.
Last edited by danielplace; 03-17-2019 at 10:09 AM.
#6
Junior Member
Thread Starter
sadly no response from the forum admin , I have been a member since 2006 ? and not allowed more than 4 posts in a 24 hr period ? whats gone wrong at RC Universe ? thanks to the members who offered advice .
Last edited by euan galloway; 03-18-2019 at 08:50 AM.
#7
Junior Member
Thread Starter
photos at last ?
I originally purchased what I thought was a Jetcat P 80 but after having it serviced it turns out to be a 120 and far too much power for this hull , plan b is to use a wren 70 that has been on one of my gliders .
donor wren 70 turbine
Last edited by euan galloway; 03-18-2019 at 09:02 AM.
#14
Junior Member
Thread Starter
it was just for a bit of fun , I have a new turbine boat project on its way but this time a Jetcat marine turboshaft and a sensible MHZ hull with twin drives from MHZ it needs a bit of tlc but was a good deal ,
should start posting some photos later this week
#15
My Feedback: (3)
thanks,
it was just for a bit of fun , I have a new turbine boat project on its way but this time a Jetcat marine turboshaft and a sensible MHZ hull with twin drives from MHZ it needs a bit of tlc but was a good deal ,
should start posting some photos later this week
it was just for a bit of fun , I have a new turbine boat project on its way but this time a Jetcat marine turboshaft and a sensible MHZ hull with twin drives from MHZ it needs a bit of tlc but was a good deal ,
should start posting some photos later this week