expresscraft

Another really great job, I hope it runs perfect for you. Now all you have to do is move to Florida....lol

F1madness

Thanks tom,means alot coming from some1 such as yourself who knows what it takes and the work involved and been doing along time
LOL you got my room ready hahaha

F1madness

All wetsanded and polished
Just awaiting on the hardware etc then start the building it up ready for testing

F1madness

Started on the build up
Hardware mounted on the transom ,Stainless vents on topdeck ,rear vents cut out and at the side of cockpit on exhaust side,grab handles made and fitted for easier launching and retrieval
Engine stringers cut,shaped and drilled to make install easier for the final build up

James Brand

corker, should be stoked with that mate!

F1madness

Cheers james
pretty happy so far with how its come out just hoping now for some good performance from it and looking forward to seeing it on the water

F1madness

All finished (minus last bits of vinyl) ,test fired and ready for the water this coming weekend at our next race meeting

F1madness

Well here it is 1st vid clip of maiden run of the concept vee from 1st race heat ,failed EZ starter beginning of 2nd heat meant i did race and cut the day short
Didnt hit full throttle and was running rich and with choppy water and windy conditions i was taking it easy get the feel for the boat and go from there
But overall a good 1st run need to do some adjustments on radio and more testing and see how it goes from there

https://youtu.be/mIzialTLJVE

F1madness

Part 2

https://youtu.be/WQVqXLM6BhY