JakeDW

Well Mike is offering his PHM Fatboy Rigger in glass (500)for a limited production usualy made in carbon fiber(900) so I picked one up whats your fav manf?

Jake

JakeDW

Here is a pic of a all carbon fiber one mine will be black gell.[img][/img]

Jake

rcboateric

Looking good, I think it will be the same for the engine and pipe compo for your new missile rigger, Would you like to try a full mod CY engine? I heard it would pull a "full mod" rigger into the 100 mph zone...LOL

JakeDW

I dont know if a speed deamon will be in the cards for this one Mike said it will run in the 70s its gona get the motor out of the green Falcon and the CC 0 band pipe.I like the out of the box design the shot from the front showes just how diffrent it looks than most riggers.Shes gona be for roundy round.

Jake

rcboateric

Send all those stuff to me and I'll send them back to you for 80's..LOL, just went to Nails Air Force Base(damn, there were lots of F-22s out there) for some C12, will try it out later and see how it works.

JakeDW

Front pic[img][/img]

Jake

rcboateric

Any pictures of the sponson bottom? The whole body looks slippery.

JakeDW

Cant find anypics of the sponsons they are wood though said he had made some in glass to test out butthe would end up leaking so he scraped the idea.

Jake

JakeDW

No one else likes Riggers or has a fav?

Jake

jacob711

i like riggers, my favourites are these 2 but ive got another 100 or so pics of riggers

the first one is a g-force and the second i believe is a PHM predator

JakeDW

Very nice a guy I go to the pond with has a P2 thoes carbon cowls are cool looking.

Jake

martno1fan

Nice looking rigger Jake not many guys run those over here ,probably because we dont get many flat lakes to run on.I might build one next year of my own design using glass just for fun running,will need to handle rough water to an extent though.
Mart

rcboateric

This is my stock bottom of the sponson, it has a 1-7/8" wide ride pad, I have a mod pair coming soon, the new one has a few changes from the stock one for less dragging. a sponson is made by foam and 1/16" to 1/8" thick marine plywood.

<Link removed>

rcboateric

Jake, what prop are you going to run on your rigger? I tried many such as 6719/3, 7520/2 and 7521/2.

JakeDW

H50 mabey he gave me a list of 3 or 4 diffent ones he has tried.

Jake

rcboateric

Your good starting rigger prop is 6719/3, it's good for racing and playing, it's also easy to unload, H50 prop was popular before especially for the Quickdraw powered Stryker cat.

Scott Schneider

This was my OLD rigger from about 2001 until 2005

It did me proud by breaking & resetting the 6 lap G-1 NAMBA gas rigger National record 3 times in the 5 years she was in the stable.

It is a low production 3 point known as a D&D rigger. A hybrid of a pinkert coyote with no rear sponsons. Cowl was off an Aeromarine stinger.

This was a GREAT boat !!

rcboateric

Here's my undrilled one, I'm going to build it sometime next year, ordered a slim pair sponson and a 2170 prop.

Scott Schneider

Looks like "Midwest Missle II" sponsons ?

rcboateric

Looks like "Midwest Missle II" sponsons ?
[/quote]
You're right Scott, Richard is doing a special pair of sponson for me, the sponson width is only 2" and its ride pad is a very very low drag, I'm curently running this rigger at 81-82 mph with the stock sponsons and hopefully that new one can bring me a couple extra miles...LOL

JakeDW

Nice Riggers guys.

Jake

darknet

here is my rigger

Whiplon

Here is my rigger.

Tahoe1970

Here's my Midwest Missle rigger , has been 95+ in saw trim. Running an SS enterprise 29.5 zenoah

mistycreekboats

My Feedback: (1)

Cool -- what does the "fortune Cookie" say for 2014 ??

Cheers

Randy