New Team Pro Enforcer
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Location: San Tan Valley,
AZ
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
New Team Pro Enforcer
Few pics of my first Gas RC boat.
This is such a nice boat, I wanted to share the pics to see the quality of these boats.
Ran the first three tanks through it and am just amazed at the ease of operation and the performance was outstanding.
If anyone is looking at getting into the hobby, look long and hard at warehouse hobbies, love it
This is such a nice boat, I wanted to share the pics to see the quality of these boats.
Ran the first three tanks through it and am just amazed at the ease of operation and the performance was outstanding.
If anyone is looking at getting into the hobby, look long and hard at warehouse hobbies, love it
#4
Senior Member
My Feedback: (2)
Join Date: Oct 2003
Location: Clearwater,
FL
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
Nice boat Spoolinaw. Can you tell me what Enforcer engine version you have. The reason I ask is that I have to replace mine from the original 3 point version
#5
Senior Member
Join Date: Jan 2007
Location: Buffalo,
NY
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
Sweet looking boat! I always wanted to pick up a Team Pro hull but haven't yet. The WWH boats are great when it comes to reliability. I have several gas boats but always seem to run my Super G that I picked up really cheap a year or two ago. If I run into issues with my other boats, I can always throw the Super G in the lake and cruise around for practically an hour on a tank.
#8
Join Date: Nov 2006
Location: Andover,
NJ
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
Congratulations,very nice choice. These boats run great. I ordered mine with a dry system. Lets see some videos when you get her wet. Are you running the M5 mod??
Pyro1
Pyro1
#10
Senior Member
Join Date: Sep 2009
Location: Springfield, PA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
ORIGINAL: Doubledog
Good choice. The yellow is killer.
Good choice. The yellow is killer.
i wish it was warmer here in PA !!!! Great job on the hydro ....I have been following !!! SK
#11
My Feedback: (3)
RE: New Team Pro Enforcer
ORIGINAL: spoolinaww
Few pics of my first Gas RC boat.
This is such a nice boat, I wanted to share the pics to see the quality of these boats.
Ran the first three tanks through it and am just amazed at the ease of operation and the performance was outstanding.
If anyone is looking at getting into the hobby, look long and hard at warehouse hobbies, love it
Few pics of my first Gas RC boat.
This is such a nice boat, I wanted to share the pics to see the quality of these boats.
Ran the first three tanks through it and am just amazed at the ease of operation and the performance was outstanding.
If anyone is looking at getting into the hobby, look long and hard at warehouse hobbies, love it
If there is a better solid color for a boat - I have not seen it (near half of my boats are yellow)
#12
Senior Member
Thread Starter
Join Date: Jul 2007
Location: San Tan Valley,
AZ
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
Thanks everyone, I am running the stock engine option (G260 ZENOAH PREPARED WITH CLUTCH 2.9HP @ 12,000 RPM) not the M5 upgrade. I didn't upgrade just because its my first one and wanted everything to last and be very easy for me right away and it has been perfect.
Since Warehouse Hobbies allows orders direct from their webpage you can basically add and change every option you can think of making it so awesome to get a boat all RTR the way you want it out of the box. I am so happy with the boats quality and options that I have my friends already jotting down all the options they want on their boats when the decide to order.
The Driver and Throttle man came just like that for I believe $40-$45 installed. They have so many options to choose from you can really customize your boat to the hills if you want.
Two thumbs up for sure for this boat and company, since I'm in AZ and its still in the upper 80's you know I will be hitting the lakes all weekend long
Footage to come!
Since Warehouse Hobbies allows orders direct from their webpage you can basically add and change every option you can think of making it so awesome to get a boat all RTR the way you want it out of the box. I am so happy with the boats quality and options that I have my friends already jotting down all the options they want on their boats when the decide to order.
The Driver and Throttle man came just like that for I believe $40-$45 installed. They have so many options to choose from you can really customize your boat to the hills if you want.
Two thumbs up for sure for this boat and company, since I'm in AZ and its still in the upper 80's you know I will be hitting the lakes all weekend long
Footage to come!
#13
Senior Member
Join Date: Jul 2009
Location: grain valley, MO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
ORIGINAL: spoolinaww
Thanks everyone, I am running the stock engine option (G260 ZENOAH PREPARED WITH CLUTCH 2.9HP @ 12,000 RPM) not the M5 upgrade. I didn't upgrade just because its my first one and wanted everything to last and be very easy for me right away and it has been perfect.
Since Warehouse Hobbies allows orders direct from their webpage you can basically add and change every option you can think of making it so awesome to get a boat all RTR the way you want it out of the box. I am so happy with the boats quality and options that I have my friends already jotting down all the options they want on their boats when the decide to order.
The Driver and Throttle man came just like that for I believe $40-$45 installed. They have so many options to choose from you can really customize your boat to the hills if you want.
Two thumbs up for sure for this boat and company, since I'm in AZ and its still in the upper 80's you know I will be hitting the lakes all weekend long
Footage to come!
Thanks everyone, I am running the stock engine option (G260 ZENOAH PREPARED WITH CLUTCH 2.9HP @ 12,000 RPM) not the M5 upgrade. I didn't upgrade just because its my first one and wanted everything to last and be very easy for me right away and it has been perfect.
Since Warehouse Hobbies allows orders direct from their webpage you can basically add and change every option you can think of making it so awesome to get a boat all RTR the way you want it out of the box. I am so happy with the boats quality and options that I have my friends already jotting down all the options they want on their boats when the decide to order.
The Driver and Throttle man came just like that for I believe $40-$45 installed. They have so many options to choose from you can really customize your boat to the hills if you want.
Two thumbs up for sure for this boat and company, since I'm in AZ and its still in the upper 80's you know I will be hitting the lakes all weekend long
Footage to come!
-scott
#14
Senior Member
Join Date: Sep 2009
Location: Springfield, PA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
ORIGINAL: gtdad
just rub our noses in it why don't cha . it's actually gonna be in the 70's here this weekend and i can't wait to get my sprint cat wet!!!
-scott
ORIGINAL: spoolinaww
Thanks everyone, I am running the stock engine option (G260 ZENOAH PREPARED WITH CLUTCH 2.9HP @ 12,000 RPM) not the M5 upgrade. I didn't upgrade just because its my first one and wanted everything to last and be very easy for me right away and it has been perfect.
Since Warehouse Hobbies allows orders direct from their webpage you can basically add and change every option you can think of making it so awesome to get a boat all RTR the way you want it out of the box. I am so happy with the boats quality and options that I have my friends already jotting down all the options they want on their boats when the decide to order.
The Driver and Throttle man came just like that for I believe $40-$45 installed. They have so many options to choose from you can really customize your boat to the hills if you want.
Two thumbs up for sure for this boat and company, since I'm in AZ and its still in the upper 80's you know I will be hitting the lakes all weekend long
Footage to come!
Thanks everyone, I am running the stock engine option (G260 ZENOAH PREPARED WITH CLUTCH 2.9HP @ 12,000 RPM) not the M5 upgrade. I didn't upgrade just because its my first one and wanted everything to last and be very easy for me right away and it has been perfect.
Since Warehouse Hobbies allows orders direct from their webpage you can basically add and change every option you can think of making it so awesome to get a boat all RTR the way you want it out of the box. I am so happy with the boats quality and options that I have my friends already jotting down all the options they want on their boats when the decide to order.
The Driver and Throttle man came just like that for I believe $40-$45 installed. They have so many options to choose from you can really customize your boat to the hills if you want.
Two thumbs up for sure for this boat and company, since I'm in AZ and its still in the upper 80's you know I will be hitting the lakes all weekend long
Footage to come!
-scott
We're in PA ! Anyway ....very nice boat. You made a great choice!!! I have a WHH Super G & Crackerbox !!! The boats are great and Tony's service is great!!! I wish you nothing but good luck and fun with your new boat!!!! SK.
#15
Senior Member
My Feedback: (48)
Join Date: Mar 2003
Location: Gulf Shores, AL
Posts: 1,885
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
The one thing I'm wondering is the position of the engine as it comes from them. My boat required pushing the engine further forward than that and still could've used another 1/2" more to keep the bow down. If you look at mine, the spark plug is right between the drivers. Kind of wish I'd have went with an IV bag and not the tank. BUT, I like the tank and couldn't push it much further forward and still have good access. Then again, maybe they feel that a lot of folks will try to keep it full therefore adding the additional weight up front. Again, Love the boat and wish we could run the snot out of them as a group. Btw, anyone remember the article of the RTR shootout in RCBM? Will have to dig it up and scan for ya'll. WHH simply rocked the competition. (*Disclamer*, I very much respect and admire the WHH crew and in no way knocking or discrediting their methods)
#16
RE: New Team Pro Enforcer
Hey Bro,
I’m in north Scottsdale, 84 degrees today and love running the WHH boats. Wish I could ditch work and go to the lake today it’s so nice out. I’ve owned almost every model. I just got a Mantaray and now done with break in but need more speed. The Enforcer boat’s are the best boat’s I have ever owned. Tony is awesome. I run at lake pleasant or Bartlett lakes. Really nowhere else to run oh yea we have run the boats on the Verde river around Rio Verde. Where do you run yours ? Hope you enjoy your new boat. Has anyone installed the M5 kit without removing the motor ?
Here's a few shots and a crapy phone vid.
http://www.youtube.com/user/cortrigh.../1/Bij40pLJsGc
I’m in north Scottsdale, 84 degrees today and love running the WHH boats. Wish I could ditch work and go to the lake today it’s so nice out. I’ve owned almost every model. I just got a Mantaray and now done with break in but need more speed. The Enforcer boat’s are the best boat’s I have ever owned. Tony is awesome. I run at lake pleasant or Bartlett lakes. Really nowhere else to run oh yea we have run the boats on the Verde river around Rio Verde. Where do you run yours ? Hope you enjoy your new boat. Has anyone installed the M5 kit without removing the motor ?
Here's a few shots and a crapy phone vid.
http://www.youtube.com/user/cortrigh.../1/Bij40pLJsGc
#17
Junior Member
Join Date: Apr 2009
Location: chandler, AZ
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
I am in chandler and run in scottsdale at corner of indian school and haydon,Nice pond on sundays few fellow boaters out there with good info to help you run your best just need to ask? and have fun.Iam looking at a nother pond in gilbert it is a lot bigger I should know more in a coupel weeks as I need to know who to get permission from.I will keep all phoenix posted as you can never have to many places to have fun at!!!!!!!!!!!!!! MEL
#19
Senior Member
Join Date: Jan 2008
Location: Conyers, GA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
I installed the M5 mod in my Magnum Old School without removing the engine.
Just make sure you stuff enough clean rags in the open crankcase to keep any foreign material from falling in the crankcase when you remove the Jesus Clip and the Gasket Material if you have to scrape it to remove it from the Crankcase.
#20
Senior Member
Thread Starter
Join Date: Jul 2007
Location: San Tan Valley,
AZ
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
ORIGINAL: gtdad
just rub our noses in it why don't cha [img][/img]. it's actually gonna be in the 70's here this weekend and i can't wait to get my sprint cat wet!!!
-scott
just rub our noses in it why don't cha [img][/img]. it's actually gonna be in the 70's here this weekend and i can't wait to get my sprint cat wet!!!
-scott
ORIGINAL: Doubledog
The one thing I'm wondering is the position of the engine as it comes from them. My boat required pushing the engine further forward than that and still could've used another 1/2'' more to keep the bow down. If you look at mine, the spark plug is right between the drivers. Kind of wish I'd have went with an IV bag and not the tank. BUT, I like the tank and couldn't push it much further forward and still have good access. Then again, maybe they feel that a lot of folks will try to keep it full therefore adding the additional weight up front. Again, Love the boat and wish we could run the snot out of them as a group. Btw, anyone remember the article of the RTR shootout in RCBM? Will have to dig it up and scan for ya'll. WHH simply rocked the competition. (*Disclamer*, I very much respect and admire the WHH crew and in no way knocking or discrediting their methods)
The one thing I'm wondering is the position of the engine as it comes from them. My boat required pushing the engine further forward than that and still could've used another 1/2'' more to keep the bow down. If you look at mine, the spark plug is right between the drivers. Kind of wish I'd have went with an IV bag and not the tank. BUT, I like the tank and couldn't push it much further forward and still have good access. Then again, maybe they feel that a lot of folks will try to keep it full therefore adding the additional weight up front. Again, Love the boat and wish we could run the snot out of them as a group. Btw, anyone remember the article of the RTR shootout in RCBM? Will have to dig it up and scan for ya'll. WHH simply rocked the competition. (*Disclamer*, I very much respect and admire the WHH crew and in no way knocking or discrediting their methods)
I love it
ORIGINAL: magnum57
Hey Bro,
I’m in north Scottsdale, 84 degrees today and love running the WHH boats. Wish I could ditch work and go to the lake today it’s so nice out. I’ve owned almost every model. I just got a Mantaray and now done with break in but need more speed. The Enforcer boat’s are the best boat’s I have ever owned. Tony is awesome. I run at lake pleasant or Bartlett lakes. Really nowhere else to run oh yea we have run the boats on the Verde river around Rio Verde. Where do you run yours ? Hope you enjoy your new boat. Has anyone installed the M5 kit without removing the motor ?
Here's a few shots and a crapy phone vid.
http://www.youtube.com/user/cortrigh.../1/Bij40pLJsGc
Hey Bro,
I’m in north Scottsdale, 84 degrees today and love running the WHH boats. Wish I could ditch work and go to the lake today it’s so nice out. I’ve owned almost every model. I just got a Mantaray and now done with break in but need more speed. The Enforcer boat’s are the best boat’s I have ever owned. Tony is awesome. I run at lake pleasant or Bartlett lakes. Really nowhere else to run oh yea we have run the boats on the Verde river around Rio Verde. Where do you run yours ? Hope you enjoy your new boat. Has anyone installed the M5 kit without removing the motor ?
Here's a few shots and a crapy phone vid.
http://www.youtube.com/user/cortrigh.../1/Bij40pLJsGc
Here is my email address, if you and other ever want to meet up and do some boating!
[email protected]
Im in Queen Creek, OH and my wife and I took it to Canyon Lake !
We basically went on a week day and got there around 11am, went to the farthest spot out where you can park and just walk along the picnic areas and drove it around.
Thought for sure we would get in trouble since its "no wake" and "no motor" zones of any kind but since it was a week day and nobody was in the area we were left alone there for about 4 hours breaking it in and messing around with breaks in between...etc
It was perfect!
ORIGINAL: melvenraymie
I am in chandler and run in scottsdale at corner of indian school and haydon,Nice pond on sundays few fellow boaters out there with good info to help you run your best just need to ask? and have fun.Iam looking at a nother pond in gilbert it is a lot bigger I should know more in a coupel weeks as I need to know who to get permission from.I will keep all phoenix posted as you can never have to many places to have fun at!!!!!!!!!!!!!! MEL
I am in chandler and run in scottsdale at corner of indian school and haydon,Nice pond on sundays few fellow boaters out there with good info to help you run your best just need to ask? and have fun.Iam looking at a nother pond in gilbert it is a lot bigger I should know more in a coupel weeks as I need to know who to get permission from.I will keep all phoenix posted as you can never have to many places to have fun at!!!!!!!!!!!!!! MEL
[email protected]
#21
RE: New Team Pro Enforcer
That’s great. I hate to take everything apart to mod the motor. It’s brand new and really hate to take everything out of the hull. I was just concerned about installing the wrist pins in such a tight space.
I will definitely check out the Indian school & Hayden pond. Does’ anyone have a recovery boat if needed?
My email is [email protected]. Look forward to meeting you guys at the pond. Will you be there tomorrow morning and what time?
I will definitely check out the Indian school & Hayden pond. Does’ anyone have a recovery boat if needed?
My email is [email protected]. Look forward to meeting you guys at the pond. Will you be there tomorrow morning and what time?
#22
Junior Member
Join Date: Apr 2009
Location: chandler, AZ
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
Pond is not that big.Just bring a ball thats tied to a reel.Some one will have one if you don't.Don't get me wrong it is large enough to get some prety good speeds.Try it you'll have a blast. LATER MEL
#25
Junior Member
Join Date: Apr 2009
Location: chandler, AZ
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: New Team Pro Enforcer
Most guys show around 9am.Some houses near by but mostly comercial area dont want to piss off the neighbors so we don't start runnin before that.They are some really nice guys.Most of the time I don't get to stay very long I have wife with me and she is kinda shy and stays in car but it is cooler now I might get to stay a little longer this time.I will see if I can get my stuff going tonight and join you guys in the morning.LATER MEL