Guide to make a PVC stand
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jan 2009
Location: orland park, IL
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Guide to make a PVC stand
Iknow building a PVC stand is pretty basic but each time I buy material I have to refigure how much Ineed of what. Since Iwrote it down I might as well share it.
This works good for a vee because the nose hooks in the front - this allows me to hold the stand (and the front of the boat) with my foot for extra support when pull-starting.
The image leaves a lot of room for design improvement, but for folks who are searching for a place to start, this might help you out.
Regards, -Mick
This works good for a vee because the nose hooks in the front - this allows me to hold the stand (and the front of the boat) with my foot for extra support when pull-starting.
The image leaves a lot of room for design improvement, but for folks who are searching for a place to start, this might help you out.
Regards, -Mick
#2
My Feedback: (1)
RE: Guide to make a PVC stand
a short video may help people too along with your list..
http://youtu.be/8HioW0kkv7w
Size of piping may vary but concept the same
Cheers
Randy
http://youtu.be/8HioW0kkv7w
Size of piping may vary but concept the same
Cheers
Randy