RatCat BJ26
07-23-2008, 10:32 AM
#26
Thread Starter
RE: RatCat BJ26
ORIGINAL: BB Modss
Umm, Iv got that 35 plus 21 sitting here, and a stroked novarossi 21 (but its counter rotating). If you want the 35 plus 21, let me know, ill toss the P5 sleeve in it so you can run it, the 35 plus 21 sleeve wont do you any good, the exhaust timing is way to high to get any power out of it in a cat. Iv also got a few cmb LS motor's, but if its Nova you need, Its on the way brother...
Umm, Iv got that 35 plus 21 sitting here, and a stroked novarossi 21 (but its counter rotating). If you want the 35 plus 21, let me know, ill toss the P5 sleeve in it so you can run it, the 35 plus 21 sleeve wont do you any good, the exhaust timing is way to high to get any power out of it in a cat. Iv also got a few cmb LS motor's, but if its Nova you need, Its on the way brother...
, I would think something a little conservative on the power side would do nicely, I'm looking at this build for straight-away speed,with not much emphasis on cornering,I mean ....I will try to slow down when turning...LOL....looking at setting the COG somewhere between 35-37%,just to keep her moist and from getting "too airborne"....
07-23-2008, 02:03 PM
#30
Thread Starter
RE: RatCat BJ26
Right On Bro..... AAAAAaaaahhhhh, the power of beeeer, I can see this as a careful re-evaluation of all known/unknown set-up tricks just to get past half throttle...lol....I think it'll be ok for what I/We want it to do,with an altered COG and a few more OZ. of lead of course....lol... [8D] I'll secure that engine to the floatation pods should all else disintegrate while approaching the speed of sound.... [&:]
AAAAAaaaahhhhh, the power of beeeer, I can see this as a careful re-evaluation of all known/unknown set-up tricks just to get past half throttle...lol....I think it'll be ok for what I/We want it to do,with an altered COG and a few more OZ. of lead of course....lol... [8D] I'll secure that engine to the floatation pods should all else disintegrate while approaching the speed of sound.... [&:]
07-23-2008, 08:10 PM
#34
RE: RatCat BJ26
We can see who has never used a 3280. They are a loud pipe but one trick to quiet them down is to make an internal stinger. Mac pipes aren't all that hot as most are made for airplane use, way off the powerband that's needed for a hot boat engine.
Seeing how they don't make the 3280's any more they are bringing premium prices. I put one up for sale and it was gone within minutes!
Seeing how they don't make the 3280's any more they are bringing premium prices. I put one up for sale and it was gone within minutes!
07-27-2008, 10:00 PM
#37
Senior Member
Join Date: Apr 2007
Location: Walnut, CA
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
RE: RatCat BJ26
ORIGINAL: misshydro
........... Ok I was hopping to get a black from sombody else but never heard back from that guy. This is twise that this guy boned me over on a blackjack hull!![:@]
........... Ok I was hopping to get a black from sombody else but never heard back from that guy. This is twise that this guy boned me over on a blackjack hull!![:@]
07-27-2008, 10:31 PM
#38
Senior Member
Join Date: Jul 2006
Location: stmarys,
OH
Posts: 2,925
Likes: 0
Received 0 Likes
on
0 Posts
RE: RatCat BJ26
I'm sorry[
],But I'd Pm you twise asking the shipping cost on it, plus its was three weeks ago so I'd Thought you deside to keep the hull again like the last time?[&:] Dont you even check your PM's or emails?[&:] Thought you'd droped out or somthing?[&:] because on your posts all your pics are gone![X(]...I'd told you I would be ready for it after the madison races So you said this..From: losifiend
To: misshydro
Date: 7/2/2008 4:45:40 AM
Subject: RE: boat
No problem. That gives me time to strip the boat of motor and electronics.Send me a PM when you're ready.
Rafael
That sunday I'd asked you whats the shipping would be? that was three weeks ago,or very close to it with no responce back.(losifiend quote) How have I "bonned you over" twice? I was going to give it to you for FREE! excuse me if I'm too busy with buying a house, having another baby, and dealing with on going health issues to send you a free hull!! you been so buzzy??[&:] You'd been on this sight the 9,12,16,18,19 not to give me a responce back about shipping cost or telling me whats going on??[:@]I'd looked at your Dossier last night after you'd posted,on 10 top post and thread started&posted area and that doesnt lie!![X(] I'd wouldve under stand it better.[8D]But Come on not to Give some comon cents&curitisy here.[8D]
RE: Venom-Racing GPV-1 motorcycle
07/19/2008 01:53:30: PM
RE: OFFIC...
07/18/2008 10:55:03: PM
RE: ...
07/16/2008 06:14:26: PM
RE: my truly universal starter box
07/12/2008 10:39:46: PM
RE: OFFIC...
07/12/2008 06:10:42: PM
RE: Rs4 3 RTR I want to break in tomorow what d...
07/12/2008 12:12:50: AM
RE: OFFICI...
07/09/2008 11:17:28: PM
RE: OFFICI...
07/09/2008 09:06:07: PM
If you got anything to say to me just PM me about it!! I'm sorry Mopartbob about this!! Let get back to this Blackjack topic please!
],But I'd Pm you twise asking the shipping cost on it, plus its was three weeks ago so I'd Thought you deside to keep the hull again like the last time?[&:] Dont you even check your PM's or emails?[&:] Thought you'd droped out or somthing?[&:] because on your posts all your pics are gone![X(]...I'd told you I would be ready for it after the madison races So you said this..From: losifiend To: misshydro
Date: 7/2/2008 4:45:40 AM
Subject: RE: boat
No problem. That gives me time to strip the boat of motor and electronics.Send me a PM when you're ready.
Rafael
That sunday I'd asked you whats the shipping would be? that was three weeks ago,or very close to it with no responce back.(losifiend quote) How have I "bonned you over" twice? I was going to give it to you for FREE! excuse me if I'm too busy with buying a house, having another baby, and dealing with on going health issues to send you a free hull!! you been so buzzy??[&:] You'd been on this sight the 9,12,16,18,19 not to give me a responce back about shipping cost or telling me whats going on??[:@]I'd looked at your Dossier last night after you'd posted,on 10 top post and thread started&posted area and that doesnt lie!![X(] I'd wouldve under stand it better.[8D]But Come on not to Give some comon cents&curitisy here.[8D]
RE: Venom-Racing GPV-1 motorcycle
07/19/2008 01:53:30: PM
RE: OFFIC...
07/18/2008 10:55:03: PM
RE: ...
07/16/2008 06:14:26: PM
RE: my truly universal starter box
07/12/2008 10:39:46: PM
RE: OFFIC...
07/12/2008 06:10:42: PM
RE: Rs4 3 RTR I want to break in tomorow what d...
07/12/2008 12:12:50: AM
RE: OFFICI...
07/09/2008 11:17:28: PM
RE: OFFICI...
07/09/2008 09:06:07: PM
If you got anything to say to me just PM me about it!! I'm sorry Mopartbob about this!! Let get back to this Blackjack topic please!
08-30-2008, 08:10 PM
#39
Senior Member
Join Date: Jul 2006
Location: stmarys,
OH
Posts: 2,925
Likes: 0
Received 0 Likes
on
0 Posts
RE: RatCat BJ26
Ok Bob heres your boat!! just have to prime it one more time before paint! 
One pics is with my oberto2 hull with working front canard&rear wing!! I'd worked on both of them/kill two birds with one shot!BBmodss if you have any 3280 left? let me know how much you want for one?[&:]
One pics is with my oberto2 hull with working front canard&rear wing!! I'd worked on both of them/kill two birds with one shot!BBmodss if you have any 3280 left? let me know how much you want for one?[&:]
