Central NEW YORK boaters
#2451
Senior Member
Join Date: Feb 2008
Location: Canandaigua, NY
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
ORIGINAL: rickyak55
yup, ihave a scratch built mono from RCM Magazine plans with a 7.5 K&B outboard on it.. like to put the engine on a tunnel... probably a vintage HOT-SHOT... and convert the mono to inboard... the hull is a ''Ski Vee 40 drawn by Fred Reese it is40'' long and 12 1/2'' wide, constructed of 1/8'' balsa with 6 oz.cloth and resin... plans say 8lbs... i have i PICCO .67 and a brand new OPS.45... kinda still interested in riggers and hydros.... like a big rigger for the .67.. and kinda like ''old school stuff... yup i am wierd!!! what time yall going to pond thursday??? giong to have this old rigger i [picked up ready by then if i have to stay up 2 days straight!!!lol.......[img][/img]
ORIGINAL: Blackout
Nope, Rick has a O/B mono from years ago! Looks cool running on the water, but hard to get the handling optimized....
ORIGINAL: Billk44
Roger,
It sounds like Rick is considering converting a tunnel. If so the cats are generally set at 32% to 34% CG depending on the power. Personally, I would go with roughly 32% and add bow weight if necessary. The more power, the further forward the CG. This helps if you start out with a milder motor and then decide to step up.
Bill
Roger,
It sounds like Rick is considering converting a tunnel. If so the cats are generally set at 32% to 34% CG depending on the power. Personally, I would go with roughly 32% and add bow weight if necessary. The more power, the further forward the CG. This helps if you start out with a milder motor and then decide to step up.
Bill
#2454
Senior Member
Join Date: Feb 2008
Location: Canandaigua, NY
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
ORIGINAL: rickyak55
Hi guys!! is a right angle cut off disk the best way to shorten flex shaft????
Hi guys!! is a right angle cut off disk the best way to shorten flex shaft????
#2455
Senior Member
RE: Central NEW YORK boaters
ORIGINAL: rickyak55
Hi guys!! is a right angle cut off disk the best way to shorten flex shaft????
Hi guys!! is a right angle cut off disk the best way to shorten flex shaft????
thanks, Rick
#2456
Senior Member
RE: Central NEW YORK boaters
still waiting on JAE parts engine etc... got old wood finished rigger coming along!! K&B.21 mounted,driveline, cant wait to have somthing fast.. well semi fast for you pros...lol.. in the water....lets rip!!!
#2457
Senior Member
RE: Central NEW YORK boaters
ORIGINAL: advanced builder
Rick Your hooked now - Rigger Fever Alta boy
Rick Your hooked now - Rigger Fever Alta boy
#2458
Senior Member
Join Date: Sep 2008
Location: Rochester,
NY
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
Rick, My son and I usually get to the pond around 6PM on Thursdays. I am not sure what I'll have to throw into the water. Most likely it will be a gas mono and maybe a.67 mono or a .67 tunnel. Roger
#2459
Thread Starter
Join Date: Feb 2006
Location: Baldwinsville,
NY
Posts: 3,055
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
Roger ,I'll be coming as well. Bad time to break in a NR 35+21 I'll run her rich
Rick Zpoxy works good around gas. No brown yet. on my gas JAE
Luc is their a grocery store near by?
Rick Zpoxy works good around gas. No brown yet. on my gas JAE
Luc is their a grocery store near by?
#2460
Senior Member
Join Date: Feb 2008
Location: Canandaigua, NY
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
ORIGINAL: advanced builder
Roger ,I'll be coming as well. Bad time to break in a NR 35+21 I'll run her rich
Rick Zpoxy works good around gas. No brown yet. on my gas JAE
Luc is their a grocery store near by?
Roger ,I'll be coming as well. Bad time to break in a NR 35+21 I'll run her rich
Rick Zpoxy works good around gas. No brown yet. on my gas JAE
Luc is their a grocery store near by?
Bench run your NR a little if you get the chance. Have faith, she'll run good!
#2461
RE: Central NEW YORK boaters
ORIGINAL: advanced builder
Roger ,I'll be coming as well. Bad time to break in a NR 35+21 I'll run her rich
Rick Zpoxy works good around gas. No brown yet. on my gas JAE
Luc is their a grocery store near by?
Roger ,I'll be coming as well. Bad time to break in a NR 35+21 I'll run her rich
Rick Zpoxy works good around gas. No brown yet. on my gas JAE
Luc is their a grocery store near by?
you guys should see that road when your on your way in from the HWY 416.
See you guys soon.
Regards
Luc
#2462
Senior Member
Join Date: Jun 2011
Location: West Henrietta , NY
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
Rick - dependent on which day weather wise is better we'll be at the pond Saturday or Monday. Will let you know Friday night. Plan on bringing the 12 and 20 JAE boats.
T&C
T&C
#2463
Thread Starter
Join Date: Feb 2006
Location: Baldwinsville,
NY
Posts: 3,055
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
my .21CMB has detonation on the piston head & headbutton. My headbutton had no spacer. my fault.
Not real bad but enough. the top of the piston wasn't dark,like sand blasted. I don't see anything wrong inside case piston/crank bearings. My 2nd .21 green-head came today. used but very nice inside. from Ron Shaw. All ready broken in. Looks like the 35+ is going back in the box. I will bring it with me just in case.
Not real bad but enough. the top of the piston wasn't dark,like sand blasted. I don't see anything wrong inside case piston/crank bearings. My 2nd .21 green-head came today. used but very nice inside. from Ron Shaw. All ready broken in. Looks like the 35+ is going back in the box. I will bring it with me just in case.
#2464
Senior Member
Join Date: Feb 2008
Location: Canandaigua, NY
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
ORIGINAL: advanced builder
my .21CMB has detonation on the piston head & headbutton. My headbutton had no spacer. my fault.
Not real bad but enough. the top of the piston wasn't dark,like sand blasted. I don't see anything wrong inside case piston/crank bearings. My 2nd .21 green-head came today. used but very nice inside. from Ron Shaw. All ready broken in. Looks like the 35+ is going back in the box. I will bring it with me just in case.
my .21CMB has detonation on the piston head & headbutton. My headbutton had no spacer. my fault.
Not real bad but enough. the top of the piston wasn't dark,like sand blasted. I don't see anything wrong inside case piston/crank bearings. My 2nd .21 green-head came today. used but very nice inside. from Ron Shaw. All ready broken in. Looks like the 35+ is going back in the box. I will bring it with me just in case.
#2465
Thread Starter
Join Date: Feb 2006
Location: Baldwinsville,
NY
Posts: 3,055
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
ORIGINAL: Blackout
Good plan, plenty of room in Bob's trailer for a spare .21 nitro engine.
ORIGINAL: advanced builder
my .21CMB has detonation on the piston head & headbutton. My headbutton had no spacer. my fault.
Not real bad but enough. the top of the piston wasn't dark,like sand blasted. I don't see anything wrong inside case piston/crank bearings. My 2nd .21 green-head came today. used but very nice inside. from Ron Shaw. All ready broken in. Looks like the 35+ is going back in the box. I will bring it with me just in case.
my .21CMB has detonation on the piston head & headbutton. My headbutton had no spacer. my fault.
Not real bad but enough. the top of the piston wasn't dark,like sand blasted. I don't see anything wrong inside case piston/crank bearings. My 2nd .21 green-head came today. used but very nice inside. from Ron Shaw. All ready broken in. Looks like the 35+ is going back in the box. I will bring it with me just in case.
Rick we will be their at 1:00 but leaving early.
#2466
RE: Central NEW YORK boaters
well guys I will be at the pond for about 7am leaving my home at 5am.
see you all tomorrow it's going to be a PARTY in a 1/2.
wait till you see the fireworks show Sat.. night went and got $1000 worth [X(]
to bad Cindy and Tom can't make it your going to be missed.
Regards
Luc
see you all tomorrow it's going to be a PARTY in a 1/2.
wait till you see the fireworks show Sat.. night went and got $1000 worth [X(]
to bad Cindy and Tom can't make it your going to be missed.
Regards
Luc
#2467
Senior Member
Join Date: Feb 2008
Location: Canandaigua, NY
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
ORIGINAL: Canadian LoCo
well guys I will be at the pond for about 7am leaving my home at 5am.
see you all tomorrow it's going to be a PARTY in a 1/2.
wait till you see the fireworks show Sat.. night went and got $1000 worth [X(]
to bad Cindy and Tom can't make it your going to be missed.
Regards
Luc
well guys I will be at the pond for about 7am leaving my home at 5am.
see you all tomorrow it's going to be a PARTY in a 1/2.
wait till you see the fireworks show Sat.. night went and got $1000 worth [X(]
to bad Cindy and Tom can't make it your going to be missed.
Regards
Luc
We're all loaded up, leaving at 6am.
See you there!
#2469
Senior Member
Join Date: Sep 2008
Location: Rochester,
NY
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
Another good outing at Stony Pond last night. My son Tom managed to not collect any buoys!! His driving was excellent last night. It was good to see Charlie and Rick running. Rick's .21 rigger was running pretty well for the first time out. Rick...I think I saw you shooting some videos last night. If you have any of my Gas Sport Hydro, can you send me a copy...or let me know if you post them somewhere. I'll send u a pm with my email. Thanks, Roger
#2470
Junior Member
Join Date: Sep 2011
Location: Tunkhannock, PA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
Hey Rick, I couldn't help but notice that you are really interested in "Nitro-Riggers"? Just a heads up, my brother Bill has two nitro-riggers that I think he'd sell. They are a 45 and a 67 and both are very fast boats. All the best equiptment. We went to running strictly gas boats.
Let me know if you are interested, we'll be at Brick Pond, Elmira Sept. 8th and 9th for the "Shootout" and could bring the boats, if there is an interest. Thanks, Walt
Let me know if you are interested, we'll be at Brick Pond, Elmira Sept. 8th and 9th for the "Shootout" and could bring the boats, if there is an interest. Thanks, Walt
#2471
Senior Member
Join Date: Jun 2011
Location: West Henrietta , NY
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
Rick,
Hurt my knee somehow - won't be able to make it to the pond Saturday. Hope it's improved enough to make it out there on Monday.
Anyone going to be there that could help launch the riggers on Monday?
T&C
#2472
Senior Member
RE: Central NEW YORK boaters
Walt... i am interested in a hull to put my brand new OPS .45 in.. i also have a .67 PICCO that needs a home!!!!! i like riggers and hydros... let me know what and how much.... thanks!!!!
RICK P.
RICK P.
ORIGINAL: waltk
Hey Rick, I couldn't help but notice that you are really interested in "Nitro-Riggers"? Just a heads up, my brother Bill has two nitro-riggers that I think he'd sell. They are a 45 and a 67 and both are very fast boats. All the best equiptment. We went to running strictly gas boats.
Let me know if you are interested, we'll be at Brick Pond, Elmira Sept. 8th and 9th for the "Shootout" and could bring the boats, if there is an interest. Thanks, Walt
Hey Rick, I couldn't help but notice that you are really interested in "Nitro-Riggers"? Just a heads up, my brother Bill has two nitro-riggers that I think he'd sell. They are a 45 and a 67 and both are very fast boats. All the best equiptment. We went to running strictly gas boats.
Let me know if you are interested, we'll be at Brick Pond, Elmira Sept. 8th and 9th for the "Shootout" and could bring the boats, if there is an interest. Thanks, Walt
#2473
Senior Member
RE: Central NEW YORK boaters
What time monday tom??? we are camping in campbell for weekend..(near corning) but have to check out around 11.. let me know if its afternoon..i will be glad to launch for you!!
Rick P.
Rick P.
ORIGINAL: gassertom
Rick,
Rick,
Hurt my knee somehow - won't be able to make it to the pond Saturday. Hope it's improved enough to make it out there on Monday.
Anyone going to be there that could help launch the riggers on Monday?
T&C
#2474
Senior Member
RE: Central NEW YORK boaters
GO STONEY POND BOAT CLUB!!! hope all you guys are having fun in the great white north!!! kick some butt and bring back some trophies!!! i went to pond on saturday and kept it company before going to "family picnic" at flying field.... without family!!lol... ran 2 more tanks of fuel thru the rigger, hey roger, i raised the strut and it helped!! i raised it some more and got it pretty good.. i do notice that as tank runs low that it is less choppy also... if i put battery farther back would that help??? thaanks for your advise, i can hit turns at full throttle now and only skip a bit.. beginning of turn a bit rough but hooks real good coming out.. any ideas??? thanks again..
RICK P.
#2475
Senior Member
Join Date: Jun 2011
Location: West Henrietta , NY
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
RE: Central NEW YORK boaters
Rick - knee is still bothering me, dependent on how it feels tomorrow, we may go to the pond early, will make that decision in the morning. - have to leave by noon though, if we do go.
Hope the Stony Pond Team did well in Ottawa - post the results when you get a chance.
T&C