RE: Central NEW YORK boaters
Keep the switch inside or on-top, they set very low in the water when dead. Roger
|
RE: Central NEW YORK boaters
1 Attachment(s)
All,
Here (I hope) are a couple of photos that I took Sunday. Not too sure if this will work, 'cause took the pics with my phone. Craig, if it doesn't come thru, if you want, pm your e-mail address and I can e-mail the photos to you to try and post. I also took a video of the dozers in operation, pretty cool, but again, took on my phone and can't seem to download. Maybe I could find a 10 year old to help me! C&T |
RE: Central NEW YORK boaters
Thanks Cindy for the photos!
For the most part, the pond is done. :) They ran out of time with the dozers, so they never got the very south side widened. No big deal, they are coming back in a week or two to finish it off with the link-belt shovel and a smaller dozer. This area is no big deal as there really isn't much dirt there. There was more dirt to move than I expected, so I spent more money than I planned. This just means we need to start holding races to get a little money back. :D Tomorrow morning I'll walk off the pond with the GPS and let you guys know what dimensions I get. |
RE: Central NEW YORK boaters
Thanks for the update Craig.
We appreciate the time and dollars you are investing to make this a great place to race. Thanks to all the volunteers that also have been moving dirt and constructing!! Dick T |
RE: Central NEW YORK boaters
http://i1151.photobucket.com/albums/...pscb37a6b9.jpgWELL..... a slight twist on the vintage thunderboat.... had a dent in mould and a small chip... rather than bugging them for a new cowl,i went a little crazy with the dremel tool and "modernized" it a bit.... this is what i came up with... a bit more shaping and some vents and a cool scoop and glass er up!!!!! sorry to all the "Vintage Thunderboat" lovers.... just sayin<div>Rick....</div>http://i1151.photobucket.com/albums/...pscb37a6b9.jpgnice pics of the pond!!!! will help with another donation craig.... you are the MAN!!!!
|
RE: Central NEW YORK boaters
Rick, that looks like a sport hydro now! [8D] Shovel nose sport hydro, COOL! :D Put a driver under the tinted cowl.
We have a big west wind break now! They kept pushing dirt west and ended up with a tall cliff on the other side. Fine by me, makes a great back stop for shooting as well. I told Tom and Cindy we can plant shrubs on the west bank that spell "STONY POND". :D Cindy suggested, "WELCOME TO STONY POND". :D Just like what they do down in Florida on the sides of the over passes. |
RE: Central NEW YORK boaters
LOL!! i have to cut out front and make a cockpit... i have a BARBIE that will probably land in there... also have a moto-x racer guy i could use.... i like the idea of "welcome to stoney pond" in bushes or shrubs... let me talk to some old friends, maby i can hook us up with some burning bushes... i tried to find a cab forward shovel nose to model it by but not too many of them i guess... i think it looks cool... hope joe dosnt mind!!!http://www.rcuniverse.com/forum/js/f.../msn/72_72.gifas long as i can get some air dams to jam cool air in it it should be ok... probably make one like the big turbines to stick on top .....http://www.rcuniverse.com/forum/js/f...y/msn/idea.gif
thanks for the good words.. cant wait to run em.... ORIGINAL: Blackout Rick, that looks like a sport hydro now! [8D] Shovel nose sport hydro, COOL! :D Put a driver under the tinted cowl. We have a big west wind break now! They kept pushing dirt west and ended up with a tall cliff on the other side. Fine by me, makes a great back stop for shooting as well. I told Tom and Cindy we can plant shrubs on the west bank that spell "STONY POND". :D Cindy suggested, "WELCOME TO STONY POND". :D Just like what they do down in Florida on the sides of the over passes. |
RE: Central NEW YORK boaters
I'm not a New Yorker, but just wanted to add a short vid. of my vintage boat.<div>[youtube]http://www.youtube.com/watch?v=sajUArJ82vM&feature[/youtube]</div>
|
RE: Central NEW YORK boaters
ORIGINAL: Maximilionalpha I'm not a New Yorker, but just wanted to add a short vid. of my vintage boat. <div>[youtube]http://www.youtube.com/watch?v=sajUArJ82vM&feature[/youtube] </div> |
RE: Central NEW YORK boaters
ORIGINAL: rickyak55 LOL!! i have to cut out front and make a cockpit... i have a BARBIE that will probably land in there... also have a moto-x racer guy i could use.... i like the idea of ''welcome to stoney pond'' in bushes or shrubs... let me talk to some old friends, maby i can hook us up with some burning bushes... i tried to find a cab forward shovel nose to model it by but not too many of them i guess... i think it looks cool... hope joe dosnt mind!!![img][/img]as long as i can get some air dams to jam cool air in it it should be ok... probably make one like the big turbines to stick on top .....[img][/img] thanks for the good words.. cant wait to run em.... ORIGINAL: Blackout Rick, that looks like a sport hydro now! [8D] Shovel nose sport hydro, COOL! :D Put a driver under the tinted cowl. We have a big west wind break now! They kept pushing dirt west and ended up with a tall cliff on the other side. Fine by me, makes a great back stop for shooting as well. I told Tom and Cindy we can plant shrubs on the west bank that spell ''STONY POND''. :D Cindy suggested, ''WELCOME TO STONY POND''. :D Just like what they do down in Florida on the sides of the over passes. |
RE: Central NEW YORK boaters
ORIGINAL: Blackout We have a big west wind break now! They kept pushing dirt west and ended up with a tall cliff on the other side. You can start up that Stony Mountain Slope Soarers club now... stack one hobby on top of the other... Rick's head will explode he won't know whether to fly or float...http://www.rcuniverse.com/forum/js/f...spinnyeyes.gif I hope the wind break works to our advantage, as we've seen thepond gets pretty rough with a good breeze, hopefully the hill doesn't start waterspouts or something weird like that... |
RE: Central NEW YORK boaters
The new pond size looks to be 700 feet long and 275 feet wide. That should work good for us. :)
The south end still needs to be tweeked, but no biggy. The west bank will only help the way I look at it. Not so much if you get air born though. It may barrel roll you once air born. [X(] All in all, the land probably didn't change all that much as there was already a hill there. The hill is just closer to the water now. |
RE: Central NEW YORK boaters
Maximillionalpha...Thanks for sharing the video. I actually have a customer's Kyosho Jet Stream (800??) with the twin motor/drives to repair in my workshop. I've been looking for the correct universals that seem to no longer be avaialble from Kyosho, so I am adapting some Traxxas ones. If you like running electric, the newer Fast Electric's are light years faster than in the old Kyosho days...and with brushless/lipo power systems the run times seem to be about double than back in the day. You can tell from the posts here that some of us live in the past with some pretty ancient hulls and powerplants. But if it floats...it's usually still fun. Roger C.
|
RE: Central NEW YORK boaters
Craig...I thought the barrel rolls were caused by putting in too much 'aileron'!!! RC
|
RE: Central NEW YORK boaters
ORIGINAL: Maximilionalpha I'm not a New Yorker, but just wanted to add a short vid. of my vintage boat. <div>[youtube]http://www.youtube.com/watch?v=sajUArJ82vM&feature[/youtube] </div> |
RE: Central NEW YORK boaters
ORIGINAL: engineman351 Craig...I thought the barrel rolls were caused by putting in too much 'aileron'!!! RC BTW,Maximilionalpha.... thanks for sharing...http://www.rcuniverse.com/forum/js/f...ular_smile.gif..... welcome to the forum, just cause it is named central NY boaters, all boaters and fliers and even aliens are welcome!!! feel free to post,comment and share!!! nice boat!!OK, back to the "project thunderboat"build.. Rick P. <br type="_moz" /> |
RE: Central NEW YORK boaters
ORIGINAL: engineman351 Craig...I thought the barrel rolls were caused by putting in too much 'aileron'!!! RC |
RE: Central NEW YORK boaters
She looks like a winning hull Rick good job
http://www.newtonmarine.com/plans.php |
RE: Central NEW YORK boaters
ORIGINAL: advanced builder She looks like a winning hull Rick good job http://www.newtonmarine.com/plans.php |
RE: Central NEW YORK boaters
I've had her on a shelf since that video was made, Engine. I gutted her and was putting a brushless setup into her, but first I need to install a straight shaft, because under extreme speeds, the original pivoting shaft has a notion to snap at the hinged point. Glade you guys like my video.
Thanks! :) BTW....I just got into rc boats, last year due to my son's interest in them. I'm mostly a sailplane kinda guy, myself. |
RE: Central NEW YORK boaters
Maximilionalpha...During the summer if you and your son want to see some rc model boat racing you could trek up RT15 from Lewiston to Elmira, NY. We race monthly in the summer with the Southern Tier Model Boaters club at Brick Pond in Elmira. (http://www.stnyrcmbc.com/) Stony Pond is further North in the Rochester area. Roger C.
|
RE: Central NEW YORK boaters
Sounds good to me, Engineman. Wife's been wanting a family trip together, so, I may just take you up on that.
|
RE: Central NEW YORK boaters
ORIGINAL: Maximilionalpha Sounds good to me, Engineman. Wife's been wanting a family trip together, so, I may just take you up on that. SO if you take anything away from this rambling book i am writing, it should be, keep the wife happy,the kids close while they have you and r/c planes and boats etc. in your heart and soul!!!! good luck and hope to see you in elmira,as i am going to venture into the "go FAST,turn RIGHT"world this upcoming season and cant wait!!! Rick P. <br type="_moz" /> |
RE: Central NEW YORK boaters
|
RE: Central NEW YORK boaters
Thanks, I'll check it out!http://www.rcuniverse.com/forum/js/f...eeth_smile.gif
|
All times are GMT -8. The time now is 09:21 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.