trex 500 flight times
#3
Senior Member
Join Date: Aug 2007
Location: Southwick, MA
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
RE: trex 500 flight times
I get 8.5 to 9 minutes on a 4 cell 5000mah 45c Turnigy, running in Idle-up 1 of about 1800 rpm. Cut it down to 6 minutes for Idle-up 2 at 2150 rpm. Using a 16 tooth motor pinion on the stock main gear, & stock motor. I also have a Lipo monitoring device on-board, but mostly I use the count-down timer on the TX.
Shadow
Shadow
#4
Senior Member
Thread Starter
Join Date: Mar 2010
Location: ., VATICAN CITY
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
RE: trex 500 flight times
hey guys,
i can see that some of you use 4s batteries and some use 6s.
shouldn't it always be always 6s (22.2v) on a trex 500?
a 4s batt is only 14.8v.
what do have to take into account to choose the battery i want to use?
thanks.
#5
Senior Member
Join Date: Jan 2003
Location: BARNWELL,
SC
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
RE: trex 500 flight times
ORIGINAL: ReadyToGo
hey guys,
i can see that some of you use 4s batteries and some use 6s.
shouldn't it always be always 6s (22.2v) on a trex 500?
a 4s batt is only 14.8v.
what do have to take into account to choose the battery i want to use?
thanks.
hey guys,
i can see that some of you use 4s batteries and some use 6s.
shouldn't it always be always 6s (22.2v) on a trex 500?
a 4s batt is only 14.8v.
what do have to take into account to choose the battery i want to use?
thanks.