T-REX SE V2 Auto problem.
#1
Member
Thread Starter
Join Date: Aug 2006
Location: Plant City,
FL
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
T-REX SE V2 Auto problem.
My new t-rex 450 se v2 flies good,but I have a problem. The heli turns to the right as soon as I hit the throttle hold switch. Is this normal? Any help will be greatly appreciated thank you all.
#4
Senior Member
Join Date: Aug 2007
Location: Edmonton,
AB, CANADA
Posts: 7,441
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-REX SE V2 Auto problem.
What is your throttle hold pitch curve like? The other thing to remember is that 450 size helis really don't auto well, the blades are too small to maintain much momentum.
#5
Member
Join Date: Jun 2006
Location: Wanganui, NEW ZEALAND
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-REX SE V2 Auto problem.
im not too familiar with that radio but look at the trims then flick the switch and seee if the trim moves if it has digi trims. not much else i can think of. is the gyro in HH?
#6
Senior Member
Join Date: Apr 2007
Location: Mooresville, NC
Posts: 2,564
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-REX SE V2 Auto problem.
ORIGINAL: cameltoe
im not too familiar with that radio but look at the trims then flick the switch and seee if the trim moves if it has digi trims. not much else i can think of. is the gyro in HH?
im not too familiar with that radio but look at the trims then flick the switch and seee if the trim moves if it has digi trims. not much else i can think of. is the gyro in HH?
Jim
#8
Member
Join Date: Jan 2006
Location: Newcastle, AUSTRALIA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-REX SE V2 Auto problem.
has it always done this or have you had it flying without the tail kicking out? does the gyro stay in the same mode when you fick the throttle switch?. The tail will always kick out from the torque effect when you kill the throttle, but the gyro should be able to stop most of it. Check all the tail linkages are smooth and check that autorotaion gear is spinning freely so theres no unneccesary drag from anything when you flick the switch