tail trim
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Location: houston,
TX
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
tail trim
trex 450 se v2 jr770 gyro , dx6i rdio
my tail is mechanicaly centered, even travel both ways, blades straight, but in flight I have to add about 45 sub trim in the radio to keep tail from drifting to the right. i have about 63 gain set on the radio, any more and it wags. shouldn't the gyro adjust for the drift? or is it normal to add trim for the tail to adjust for rotor torque?
my tail is mechanicaly centered, even travel both ways, blades straight, but in flight I have to add about 45 sub trim in the radio to keep tail from drifting to the right. i have about 63 gain set on the radio, any more and it wags. shouldn't the gyro adjust for the drift? or is it normal to add trim for the tail to adjust for rotor torque?
#2
Senior Member
Join Date: Jan 2009
Location: Sydney, AUSTRALIA
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
RE: tail trim
Sounds to me like it may be in Rate mode, not knowing much about your gyro I would look here first: http://www.helifreak.com/showthread.php?t=41692
#3
Senior Member
Thread Starter
Join Date: Aug 2007
Location: houston,
TX
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
RE: tail trim
i was wondering if that may be the case,, stupid question time, when in HH mode on the table and i move the tail, it will return to center,, and rate mode will move to one side and stay??
#5
Senior Member
Thread Starter
Join Date: Aug 2007
Location: houston,
TX
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
RE: tail trim
that is what i just figured out, I have been flying in rate mode for over a year now, I have been pulling my hair out, wondering why the tail would never hold right.
thanks,
thanks,