t-rex 450 v2 with walkera 60 electronics
Has anyone put walkera or exceed parts on a t rex 450. my question is what settings do you use (dip settings on the back of the tx.)
It worked before on my last heli. Im stuck for some reason, all i did was change the electronics from one trex to another one, and somehow its not working. Help please. |
RE: t-rex 450 v2 with walkera 60 electronics
it will be a little dangerous using the walkera gear on an align heli.. its best that you use a better radio...
|
RE: t-rex 450 v2 with walkera 60 electronics
you're crazy if you do it
|
RE: t-rex 450 v2 with walkera 60 electronics
ORIGINAL: wildwilly you're crazy if you do it Jim |
RE: t-rex 450 v2 with walkera 60 electronics
Thanks for the response. guys
|
RE: t-rex 450 v2 with walkera 60 electronics
If it's all that you have I see no issue with it, I'm using the RX and TX from a Blade CP Pro for the time being until I get me 7TCHP setup.
|
RE: t-rex 450 v2 with walkera 60 electronics
the thing is i had it setup before and switched the servos out for new ones and now everything works but the left and right are reversed, but on the walkera radio it doesn't have a reverse it has on and off. so when i get everything else to work correctly it goes the wrong direction
|
RE: t-rex 450 v2 with walkera 60 electronics
Ahh.. I see luckily the Eflite is reversible. It's a good set up for beginniners, very docile for hovering a CP Heli. I have a Futaba 7TCHP that I'll be installing soon.
|
RE: t-rex 450 v2 with walkera 60 electronics
The on and off switch on the walkera radio.. is similar to the reverse switches..its might be just the positioning of the servo on the RX that is making it run reverse
|
RE: t-rex 450 v2 with walkera 60 electronics
All I can think of is to ask why you would want to hobble a great Heli with such a horrible radio system?
You are really going to struggle to tame the T-Rex sufficiently seeing as you will not be able to adjust Expo at all. |
RE: t-rex 450 v2 with walkera 60 electronics
I had walkera 36. Piece of junk, constantly glitching, binned it.
|
RE: t-rex 450 v2 with walkera 60 electronics
koolaid,
Try switching out those two servo conections on the RX. Should fix your problem. |
RE: t-rex 450 v2 with walkera 60 electronics
I will try to switch the servo's for now, but I ordered a futaba radio, it is digital so that will fix my problem, but thanks again for the response,
|
All times are GMT -8. The time now is 07:21 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.