SF Meets AX (Pump & Pipe)
#1
Thread Starter
My Feedback: (1)
SF Meets AX (Pump & Pipe)
I've been away from these forums for a few years and it's good to be back. I'm glad to see some of the old names are still here.
Now on to business. I have an OS AX .55 that never ran well for me regardless of prop sizes.
By chance I found out that my SF .46-P pump carb fits the .55. This carb has a HUGE 9mm venturi. So, I tapped the back plate for a pressure nipple and hooked up the pump. I bolted on a tuned pipe header, too.
Soon, I will bench run this AX .55 with the SF .46 pump, pump carb and a tuned pipe. Let's hit 16K!
Now on to business. I have an OS AX .55 that never ran well for me regardless of prop sizes.
By chance I found out that my SF .46-P pump carb fits the .55. This carb has a HUGE 9mm venturi. So, I tapped the back plate for a pressure nipple and hooked up the pump. I bolted on a tuned pipe header, too.
Soon, I will bench run this AX .55 with the SF .46 pump, pump carb and a tuned pipe. Let's hit 16K!
#4
RE: SF Meets AX (Pump & Pipe)
Good luck. I look forward to seeing your results. My ST G51 ran a little over 15k on an APC 10x6 with a .46 size Jettstream muffler bone stock. Curious to see how much stronger the 55AX is. Do post your results.