Fuji BT 24A
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: barrow, AK
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Fuji BT 24A
Engine setup stock. 2 gallons fuel through it, tuned for flight running 40-1 Troy-Bilt senthetic.
Top Flite 18-6 Wood 6900
Xoar 17-7 Wood 7000
MAS 16-8 Wood Scimitar 7100
MAS Nylon 18-6 Clasic 6150 Heavy prop for this engine.
Will try a wood 18-8 next but I don't have one yet.
Pat
Top Flite 18-6 Wood 6900
Xoar 17-7 Wood 7000
MAS 16-8 Wood Scimitar 7100
MAS Nylon 18-6 Clasic 6150 Heavy prop for this engine.
Will try a wood 18-8 next but I don't have one yet.
Pat
#2
Join Date: Dec 2005
Location: Olympia,
WA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fuji BT 24A
[:-]I've Got this engine on Carl Goldberg 67" YAK 54. Flew a few Flights with APC 17 X 6 Prop. Going Try APC 16 X 7 or 16 X 8 see if I get Unlimited Vertical and faster engine spoil up. Engine has Great Power and I Just Need Dial in the Prop for this Airplane. Did You do any Thrust measurement? What Airframe You Flying it on? I haven't Tached Mine since it had Great Thrust on the Ground. Climbing Straight Up is where see how well that Prop Pulls and also Hovering and pulling out Hover.
richgrow
richgrow
#3
Junior Member
Thread Starter
Join Date: Nov 2007
Location: barrow, AK
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fuji BT 24A
The engine lives in a BUSA 1/4 scale Fokker Dr1 that weights 15 Lbs. It flys very well with a TF 18-6 prop. A MAS 17-8 scimitar did OK but the 18-6 seems to fly better. Have not done thrust testing.
I have played with a Performance Calculater on line that says a 18" prop at 6900 it good for about 13Lbs thrust.
Pat
I have played with a Performance Calculater on line that says a 18" prop at 6900 it good for about 13Lbs thrust.
Pat