Optic 6 setup for plane
#1
Junior Member
Thread Starter
Join Date: Nov 2010
Location: eastlake,
OH
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Optic 6 setup for plane
Hi
i need step by step instructions on how to setup my Optic six transmitter with an Anylink plane
i want throttle on left stick-and rudder and Elevator on right stick
please help
[email protected]
i need step by step instructions on how to setup my Optic six transmitter with an Anylink plane
i want throttle on left stick-and rudder and Elevator on right stick
please help
[email protected]
#3
Junior Member
Thread Starter
Join Date: Nov 2010
Location: eastlake,
OH
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
That video is useless. I did find a manual that detailed different transmitter setups on the site however.
Thanks for pointing me in the right direction! It turns out there are different servo mapping modes for the anylink
Receiver that are set with a special procedure found in the manual online not with the one included.
All good once I remapped the any link rec.
Thanks for pointing me in the right direction! It turns out there are different servo mapping modes for the anylink
Receiver that are set with a special procedure found in the manual online not with the one included.
All good once I remapped the any link rec.