Tactic TR 625 Current capability
#1
Thread Starter
Join Date: Jan 2015
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Tactic TR 625 Current capability
I want to use a Tactic TR 625 reciever with two
Futaba 3010 High Torque servos on ailerons
and two on elevators. Can this receiver source
enough current to drive all four servos simultaneously?
Should I use two wires from my battery switch, with one
going to channel 1 and one going to channel 6 to supply
current to the servos from each end of the power bus?
If this is not enough, is there an external power bus
I can purchase to do the same function?
Thank you very much.
Jenny
Futaba 3010 High Torque servos on ailerons
and two on elevators. Can this receiver source
enough current to drive all four servos simultaneously?
Should I use two wires from my battery switch, with one
going to channel 1 and one going to channel 6 to supply
current to the servos from each end of the power bus?
If this is not enough, is there an external power bus
I can purchase to do the same function?
Thank you very much.
Jenny