Heng Long 1/16 Leopard 2A6 for sale
#1
Heng Long 1/16 Leopard 2A6 for sale [SOLD]
I'm selling my semi-upgraded Heng Long 1/16 Leopard 2A6. I only played the tank twice in my backyard.
99% of the time the tank is sitting on my workbench, waiting for the upgrades to be completed.
Reason of sale: I finally convinced my wife to let me buy a Tamiya Leopard 2A6.
Upgrades I've done so far:
[1] Clark model TK22-L2 board
[2] Servo recoil
[3] Servo gun elevation
[4] Servo turret 360-degree rotation mod (need to add a slip ring to complete the mod)
[5] 4:1 steel gear box (purchased from TankArmy.com)
[6] Metal road wheels (purchased from TankArmy.com)
[7] Metal drive sprockets and idlers (purchased from OZArmour)
[8] Visaton FRS-7 speaker
[9] Battery compartment box has been removed
[10] Rear LED set mod
[11] The tank is slightly weathered
In addition to the listed items, you'll also get
[1] 12-wire slip ring, never used
[2] Heng Long IR receiver
[3] Remote control for programming TK22-L2 board, comes with its own IR receiver and LED (purchased from Immortal Hobbies)
[4] Original Heng Long parts that come with the tank (road wheels, sprockets, idlers, plastic gear box, gun elevation unit, several 130 motors, ... and many more)
[5] Original Heng Long RX-18 board (I've removed one 2-pin plug for my rear LED mod)
[6] Some Heng Long accessories that come with the tank, but have not been installed
[7] Building materials (10mm aluminum tube, styrene rods and sheets, and many more)
[8] Two brass etch detailing fine mesh (can be used to build Leo's turret baskets)
[9] Hitec HS-55 micro servo
[10] Lots of 3mm/5mm LEDs (white, red, orange, round head and flat head)
[11] 1mm/1.5mm optical fibers
[12] Heng Long 2.4GHz transmitter and 7.2v battery.
Please PM if you have any questions. Thanks for watching.
99% of the time the tank is sitting on my workbench, waiting for the upgrades to be completed.
Reason of sale: I finally convinced my wife to let me buy a Tamiya Leopard 2A6.
Upgrades I've done so far:
[1] Clark model TK22-L2 board
[2] Servo recoil
[3] Servo gun elevation
[4] Servo turret 360-degree rotation mod (need to add a slip ring to complete the mod)
[5] 4:1 steel gear box (purchased from TankArmy.com)
[6] Metal road wheels (purchased from TankArmy.com)
[7] Metal drive sprockets and idlers (purchased from OZArmour)
[8] Visaton FRS-7 speaker
[9] Battery compartment box has been removed
[10] Rear LED set mod
[11] The tank is slightly weathered
In addition to the listed items, you'll also get
[1] 12-wire slip ring, never used
[2] Heng Long IR receiver
[3] Remote control for programming TK22-L2 board, comes with its own IR receiver and LED (purchased from Immortal Hobbies)
[4] Original Heng Long parts that come with the tank (road wheels, sprockets, idlers, plastic gear box, gun elevation unit, several 130 motors, ... and many more)
[5] Original Heng Long RX-18 board (I've removed one 2-pin plug for my rear LED mod)
[6] Some Heng Long accessories that come with the tank, but have not been installed
[7] Building materials (10mm aluminum tube, styrene rods and sheets, and many more)
[8] Two brass etch detailing fine mesh (can be used to build Leo's turret baskets)
[9] Hitec HS-55 micro servo
[10] Lots of 3mm/5mm LEDs (white, red, orange, round head and flat head)
[11] 1mm/1.5mm optical fibers
[12] Heng Long 2.4GHz transmitter and 7.2v battery.
Please PM if you have any questions. Thanks for watching.
Last edited by HoloTheWolf; 11-11-2014 at 11:41 PM. Reason: sold
#3
Accessories and build materials included in this sale:
PS: The black servo is taken from the upper hull and is the servo used for turret 360-degree rotation mod.
PS: The black servo is taken from the upper hull and is the servo used for turret 360-degree rotation mod.
Last edited by HoloTheWolf; 11-11-2014 at 05:57 PM.