Monster GT anyone have one?
#6203
Senior Member
Join Date: May 2007
Location: St. Johns,
NL, CANADA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
Hey quick question guys! Im about to order these wheels http://www2.towerhobbies.com/cgi-bin...?&I=LXDCW3&P=0 and im wondoring if they will fit well on the MGT? Quick response would be good
#6206
Senior Member
Join Date: Feb 2006
Location: Poughkeepsie,
NY
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
HEY! Those are the wheels I am running on my MGT! With mulchers!
ORIGINAL: DirtBonez
Hey quick question guys! Im about to order these wheels http://www2.towerhobbies.com/cgi-bin...?&I=LXDCW3&P=0 and im wondoring if they will fit well on the MGT? Quick response would be good
Hey quick question guys! Im about to order these wheels http://www2.towerhobbies.com/cgi-bin...?&I=LXDCW3&P=0 and im wondoring if they will fit well on the MGT? Quick response would be good
#6208
Senior Member
Join Date: May 2007
Location: St. Johns,
NL, CANADA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
HEY! Those are the wheels I am running on my MGT! With mulchers!
#6209
Member
Join Date: May 2007
Location: doncaster, UNITED KINGDOM
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
mta4 wishbones
mine keep snapping and to be honest it doesnt really get that much hammer
what can be done
is this a common fault on all or is it just me lol
mine keep snapping and to be honest it doesnt really get that much hammer
what can be done
is this a common fault on all or is it just me lol
#6212
Senior Member
Join Date: Feb 2006
Location: Poughkeepsie,
NY
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
go with these then. they are stronger than stock.
http://www2.towerhobbies.com/cgi-bin...?&I=LXGWR6&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LXGWR6&P=7
#6216
Senior Member
Join Date: Sep 2005
Location: Sammamish,
WA
Posts: 2,016
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
Hey guys! I stripped a 2nd speed gear! I'm PO'ed[sm=bananahead.gif]
I'm gonna [sm=punching.gif] the screws holding the housing to the gear.
I'm gonna [sm=punching.gif] the screws holding the housing to the gear.
#6217
Senior Member
Join Date: Jan 2006
Location: Portland,
OR
Posts: 2,682
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
Finally got 'er done [8D] (almost)
from the top - left side
from top - right side
Truck is in the same spot as it is in the pic above
and as soon as the rain pases, I'll tear it up with the MGT
edit.. and here's the before pic from close to the same spot as the 1st pic..(just ignore the yellow lines..)
from the top - left side
from top - right side
Truck is in the same spot as it is in the pic above
and as soon as the rain pases, I'll tear it up with the MGT
edit.. and here's the before pic from close to the same spot as the 1st pic..(just ignore the yellow lines..)
#6221
Senior Member
Join Date: Sep 2005
Location: Sammamish,
WA
Posts: 2,016
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
That's a way nicer track than what I have...
But I fixed the truck in like 30 min and got it running and here's what I did for a while. BACKFLIPS!!!! WOOO HOOO! So much fun and nothing broke.
http://www.youtube.com/watch?v=uLzZRNYQXSQ
But I fixed the truck in like 30 min and got it running and here's what I did for a while. BACKFLIPS!!!! WOOO HOOO! So much fun and nothing broke.
http://www.youtube.com/watch?v=uLzZRNYQXSQ
#6223
Senior Member
Join Date: Oct 2005
Location: launceston, AUSTRALIA
Posts: 2,799
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
ok well that was weird, i went out to have a bash, about 5 mins, stripped spur, im like ***, this has never happened, went and threw another on there, and bam, it strips again, when putting the second spur on, i readjusted the mesh to perfect, then tightened the engine mounts down, i got some larger hex bolts for the engine mounts at the hardware store a while back, so i could tighten them down harder, which i do with a pair of pliars and twist nice and tight. I dont get why it would strip with a perfect mesh, tightened slipper, super tight engine mount bolts etc. Im gonna go to the hardware store again tomoz to see if i can get some screws for my RRP steel spur, as 2 of the 3 fell out on me, and thats why i was runnin the plastic spurs, dam this pisses me off
#6224
Senior Member
Join Date: Jan 2006
Location: Portland,
OR
Posts: 2,682
Likes: 0
Received 0 Likes
on
0 Posts
RE: Monster GT anyone have one?
ORIGINAL: scottywilkes
hey thas awesome duck, when i come to the US, il have to come to Oregon, so i can bash with ya
hey thas awesome duck, when i come to the US, il have to come to Oregon, so i can bash with ya
hey.. everyone here is welcome to come over and tear it up whenever, sound cool? you guys pay for the air fare though lol.... but, if I hit Powerball, the bash party is on me, all expenses paid!!! [8D] .. I guess I gotta' actually play Powerball to have chance though heheh...