Hanger 9 servo arms
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: stanfield, NC
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Hanger 9 servo arms
Hi Don, This might have been asked before, but I just recieved a set of Hanger 9 servo arms for JR and they don't fit the splines. Have you seen this problem before? If so what's the solution? Thanks for your help. Jerry.
#2
Senior Member
Join Date: Nov 2004
Location: , NY,
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hanger 9 servo arms
Pardon me for replying ....but there seems to be a difference between the Standard 537 Servos and the new JR Sport Servos. Not only are the splines slightly different...the JR Sport servo screws are a FINE thread ...the 537's are COARSE
#3
My Feedback: (1)
RE: Hanger 9 servo arms
Jerry, not sure what servos your using. They've worked on every JR servo I've used, although I have not used the JR sport servos. Are you referencing the new silver adjustable spline arms, or the older gold colored metal arms? The Gold ones are stamped with a "J" on the bottom. H9 makes ones stamped with "F" for Futaba which have a different spline.
Don
Don
#4
Junior Member
Thread Starter
Join Date: Feb 2003
Location: stanfield, NC
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hanger 9 servo arms
Don. the servos I'm using are JR 8411 and 9411. The arms are the gold colored ones with a J stamped on them.Thanks for your help, Jerry.
#5
Senior Member
My Feedback: (4)
Join Date: Feb 2002
Location: Maryville,
TN
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hanger 9 servo arms
I have some of the Gold J-stamped arms and some of them fit, some of them don't. I'm guessing its a problem with inconsistencies in the anodizing. Won't buy them again. --Derek
#7
Junior Member
Thread Starter
Join Date: Feb 2003
Location: stanfield, NC
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hanger 9 servo arms
Don,I'm not sure I can make it to the BARKS contest this weekend, but I apreciate your offer. You might give them to John Ferrell and he'll get them to me. I have 4 HD half arms 4-40 and 1 HD full arm 4-40. Thanks for your help. Jerry