NEW Hangar 9 85cc SU-26MM Sukhoi
 

Guys, the info and video is here:



http://www.horizonhobby.com/Products...ProdID=HAN1225

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Very nice Mike.What motor did you have in the video plane?

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

DA-85 with an MTW 110 canister. Mej 27 x 10 TH prop

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Mike,

I am loving your re-released Cap on a DA-85 also only running one servo with the c/f goodies coming in at 21.5 lbs. I know this has to be another winner for you. That DA is a beast:D:)[8D];)

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

MIKE I LOVE YOU MAN, THIS IS JUST WHAT I WANTED FOR X-MAS KEEP UP THE GOOD WORK, I GOTA GO SWEET TALK THE OLD LADY.:D

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

hi mike, i have an older zdz 80 twin. would you suggest this motor for the sukhoi? i fly a bit of 3d and pattern.

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

No experience with the ZDZ, but with the DA-85 it has plenty of power to spare, so less would still be very good.

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

I have two 8611a's and three 8711's... should i use the 8611a's in the elevators or ailerons?

What size servo arms, I need to order those...

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

I'm using 8611A on ail and elev and 1 8711 on rudd. I'd use the 8711 on ail and 8611A on elev given what you have. I use the aluminum JR servo arms.

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Thanks Mike, I can't wait!

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Oh yeah, what battery sizes do you recommend?

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

I used 2 x 4500 mah Lipos on the rx and a 3rd on the ign. More than is needed, but the packs arent too heavy so I prefer to have plenty of battery

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Mike!
I'm waiting for mine to come... hope I get it by the end of the year!
Anyway, I'm putting a ZDZ Super 80 RV-J with a JMB can which is huge. It's about 83mm diameter and 24" from sparkplug to end. Will that header/can setup fit in the tunnel... i'm assuming it has a can tunnel?
Also, do you know if the Hangar 9 decal on the cowl is already attached when it comes or will that have to be installed?
Thanks Much!
Lyle

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

how do the stabs attach? I will have to remove them every time unfortunately...

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Its pretty tight in the can area. The MTW 110 fits (69mm dia) but there isnt a lot more room. The decal will be on a sheet not on the cowl.
The stab attached with two tabs under each stab (like the one on the 35% 260 x 2) attached to the fuse with a 4-40 bolt in each.

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Nice, that is the way to do a stab in my opinion!

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Couple more questons: Does the DA bolt right to the firewall? Will the same size wingtube be used so an older Carbon one will fit this plane?

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

AEROSHELDON,

Yes Tha DA 85 bolt right on the firewall.

Serge

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Yes the DA-85 bolts directly onto the fwall. The wing tube is the same as is used in the 35% 260.

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Thanks! Do we still think Mid-December?

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

No. Its looking like early Jan.

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Uh-Oh, there goes Christmas present for this one!!

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Thanks Mike... we'll figure something out... maybe a different can, split the can, or just go with the pitts muffler. I hate flying chain saws! Anyway, it looks too good to pass up.
Cheers,

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

Is this set up like an Aero-Works quick build kit?

RE: NEW Hangar 9 85cc SU-26MM Sukhoi
 

I would like to know what modifications have been made to this ARF versus the previous H9 Sukhoi 33% ARF and one other question, is the Hanger 9 on the cowl already applied and permanent or does the builder get to apply it?