Parkzone Sport Cub S2 Maiden with Snow Skis:
#1
Member
Thread Starter
Join Date: Dec 2013
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Parkzone Sport Cub S2 Maiden with Snow Skis:
Check out the attached videos of the assembly of my Sport Cub. I go into detail all the mods I did on this plane. The recommended fly weight with wheels is 945 grams. The actual fly weight with the skis was 1297 grams. I thought I might have gone to far over the weight limit, but I flew two flights, each with one Admiral 3S 2200mah 45C battery. Each flight was around 6-7 minutes. Each battery was around 30% after each flight and a little warm, but not hot. The ESC (40 AMP) and motor (stock) were warm, but not hot. The plane had plenty of power and lift. I actually did quit a few aerobatic maneuvers, loops, snap rolls and knife edges. You really couldn't see them on the video, so I cut them out and concentrated on take offs and landings. I was quite surprised as to how well she flew, had a ball flying her. Enjoy the videos.
Wisconsin John
Sport Cub S2 Assembly Part-1:
[TABLE="class: tborder video-embed-box"]
[TR="class: tcat"]
[TD="class: smallfont video-player"]Parkzone Sport Cub Assembly - Part One (20 min 10 sec)[/TD]
[/TR]
[TR="class: alt1"]
[TD]
[/TD]
[/TR]
[/TABLE]
[TABLE="class: tborder video-embed-box"]
[TR="class: tcat"]
[TD="class: smallfont video-player"]Parkzone Sport Cub Assembly - Part Two (20 min 51 sec)[/TD]
[/TR]
[TR="class: alt1"]
[TD]
[/TD]
[/TR]
[/TABLE]
Wisconsin John
Sport Cub S2 Assembly Part-1:
[TABLE="class: tborder video-embed-box"]
[TR="class: tcat"]
[TD="class: smallfont video-player"]Parkzone Sport Cub Assembly - Part One (20 min 10 sec)[/TD]
[/TR]
[TR="class: alt1"]
[TD]
[/TD]
[/TR]
[/TABLE]
[TABLE="class: tborder video-embed-box"]
[TR="class: tcat"]
[TD="class: smallfont video-player"]Parkzone Sport Cub Assembly - Part Two (20 min 51 sec)[/TD]
[/TR]
[TR="class: alt1"]
[TD]
[/TD]
[/TR]
[/TABLE]