CENTER CVD'S
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: spruce pine,
NC
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
CENTER CVD'S
i have 4910 2.5 truck with a 3.3 on it, i have ordered cvd axles for 4910 wide, but am curious about what center cvd's i can use, i think anything but extended frame should work [right?], what do you guys think?????
#2
Senior Member
Join Date: Apr 2010
Location: rochester,
NY
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
RE: CENTER CVD'S
What cvds did you order? You could use the mip spline cvds in the center, but you need a 6 mm output shaft, yours is 5mm. I'm not sure if you need just a shaft or a whole new 3.3 tranny....snook man would know for sure.
#3
Senior Member
Join Date: Sep 2010
Location: , CA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
RE: CENTER CVD'S
Don't get any centers for the 4907/4908 extended chassis. Make sure its specific for your model. I think I had a set of dynamite center CVD's on my old 2.5, I actually still have the set if you would want to get it cheap...I could post you some pics.
#4
Senior Member
Join Date: Oct 2010
Location: Helenvillw,
WI
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
RE: CENTER CVD'S
The extended chassis ones wont work because they have a different brake, so even if you cut them down they wont work. You should be able to use any center shafts as long as they are for the standard length chassis. I know for a fact that the 4908/4907 tranny has bigger output shafts (i belive 6mm) and im 99% sure that the shafts on the 4910 are 5mm