Traxxas Summit
#2002
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Dothan,
AL
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Yeah post up some vids of that BL setup!!! Ive been thinking of going BL...Ive got $300 to blow and cant decide if I want a new plane or if I should put more in the Summit????? Ive got to repaint my body bc my wife put a chair leg on the hood So im thinking of getting it Camo again but 1 of those plastic wraps like people do with their 1/1 scale cars/trucks. Ill let yall know how that turns out.
#2003
Junior Member
Join Date: Jul 2012
Location: Brisbane, AUSTRALIA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
http://www.hobbyking.com/hobbyking/s...50KV_120A.html
Here is the link to the motor combo I decided to go with. I never tried to post a link before so I hope it works and helps you guys.
I found some answers to my questions in the discussions area for this combo. This combo works ok for me but if you are looking for standing back flips or super fast speed runs you should look elsewhere. My summit now keeps up with my mates 1/8 Monster Truck Nitro Circus Basher (from hobbyking also). Lots of fun to drive now,however its not like it has MENTAL power as I stated above. I am confident my driveline will hold up with this combo. Hey Beast if you got that kind of cash maybe a Tekin combo would be better for you. They seem to be tried and true!!!
Here is the link to the motor combo I decided to go with. I never tried to post a link before so I hope it works and helps you guys.
I found some answers to my questions in the discussions area for this combo. This combo works ok for me but if you are looking for standing back flips or super fast speed runs you should look elsewhere. My summit now keeps up with my mates 1/8 Monster Truck Nitro Circus Basher (from hobbyking also). Lots of fun to drive now,however its not like it has MENTAL power as I stated above. I am confident my driveline will hold up with this combo. Hey Beast if you got that kind of cash maybe a Tekin combo would be better for you. They seem to be tried and true!!!
#2005
Senior Member
Hey man. I just ordered the 820 Kershaw motor....can you post a pic of the modification to the stock motor mount plate. I'd like to mount it up like you did!
Got my dewalt motor fixed last week and got it mounted using the kershaw gear and decided it was too much of a pain in the ass to have to pull the tranny just to replace a spur gear. IMO the stock mount not only is more aesthetically pleasing but also less to work around as well. All it takes is drilling out the holes on the aluminum mount add a washer and bam it works what you guys think? ***
#2006
Senior Member
Guys I am ordering this new body. Looks pretty sick. http://prolineracing.com/bodies/apocalypse-clear-body/
Got a few custom body
/wheel/tire builds going on right now for my Bl ERevo and Summit......refreshing my trucks finally! I have neglected to touch them in about a year due to my new sickness of flying Quads lol.
But the Summt is getting the Dewalt 820 w/ 18 T pinion. The Turnigy Nano Tech 2S 7600mah lipo batteries....The new Apocolypse body with custom Led lights and I...STILL need to pick new wheels and tires.....my 24mm Chayanne wheels and 40 series big joe tires got so water logged they will not dry....I have already drilled several holes in them to help with the drying, still super wobbly and heavy....pretty much a loss.
so axial oversized 8 spoke maybe black chrome with that body? Trencher X or ???? Suggestions?
Got a few custom body
/wheel/tire builds going on right now for my Bl ERevo and Summit......refreshing my trucks finally! I have neglected to touch them in about a year due to my new sickness of flying Quads lol.
But the Summt is getting the Dewalt 820 w/ 18 T pinion. The Turnigy Nano Tech 2S 7600mah lipo batteries....The new Apocolypse body with custom Led lights and I...STILL need to pick new wheels and tires.....my 24mm Chayanne wheels and 40 series big joe tires got so water logged they will not dry....I have already drilled several holes in them to help with the drying, still super wobbly and heavy....pretty much a loss.
so axial oversized 8 spoke maybe black chrome with that body? Trencher X or ???? Suggestions?
#2007
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Dothan,
AL
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
My next tire will be the trencher Xs. That body is sick!!!! I kinda made me sick seeing it bc i ordered a new stock body yesterday and couldve gotten that
#2008
Senior Member
Yah I think I am sold on the trencher X tires and just not sure on the rims yet...hmmmm.....good to see some are still "around" I'm pumped about the Dewalt 820 coming. I pre ordered the Apocolypse body today and the paint. Should look sick.
#2010
Senior Member
I am so close to getting the Mudslingers but with the Apocolypse body
i think the Trenchers are my way to go. I had them before on a Savage Ss and they ran really well.
i think the Trenchers are my way to go. I had them before on a Savage Ss and they ran really well.
#2011
Senior Member
Do you seal your tires so no water gets inside them? My big jokes were ruined after a few runs because the water didn't get completely out. Sucks $ down the drain.
#2015
Senior Member
Cool, I think I will be going with the Beadlocks. This will be my first set and since it's on the Summit, I should not have any problems with them pulling form the beads. On my E-Revo that worries me so not sure which wheels to go with yet. I'm doing the Proline Rat Rod Body for the BL E-Revo.
#2018
Senior Member
Looks good man.
question - For your Dewalt motor, did you solder capacitors onto it? Like some 100nF Capacitors? If so where did you order them from and where exactly do I solder them onto the motor? I just got the Dewalt 820 motor in yesterday, with the plugs etc all pre done but I was worried about radio interference if they are not used?
question - For your Dewalt motor, did you solder capacitors onto it? Like some 100nF Capacitors? If so where did you order them from and where exactly do I solder them onto the motor? I just got the Dewalt 820 motor in yesterday, with the plugs etc all pre done but I was worried about radio interference if they are not used?
#2020
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Dothan,
AL
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
No caps on mine. As long as u have the 2.4G ure good. No interference without caps. Yes those are the mudslingers. Gonna be cutting them in a few days
#2021
Senior Member
I just purchased the 2.4ghz controller and receiver, I had the old style controller and needed to upgrade anyway. I also bought the Proline F11 Beadlock 1/2" offset black wheels. I am SO close to getting those mudslingers..it;s between those and the trencher X tires. Wjat do you think would look meaner with the apocalypses body, man Its a tough choice....
#2023
Senior Member
I went with the Mudslingers, after seeing your pics I think they look more aggressive on the truck. I'll probably buy the 8 spoke wheels and add Trencher X tires as a back up set. I like the added clearance vs lowering the truck with the trenchers....