E-Maxx with XO-1 electronics with telemetry
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Ann Arbor,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
E-Maxx with XO-1 electronics with telemetry
I decided to donate one of my XO-1s organs for a transplant to my E-Maxx and it's alive . Have driven it quite a few times and runs great
Here are some pics
http://traxxas.com/forums/showthread...ys-to-see-this
Here are some pics
http://traxxas.com/forums/showthread...ys-to-see-this
#2
Senior Member
My Feedback: (11)
RE: E-Maxx with XO-1 electronics with telemetry
Looks good, I love those 1717 motors, they're beasts! Little advice, rotate the motor 90 degrees so the motor wires aren't pointing up, less likely to get damaged. Also, motor wires do look a little stretched and looks like plugging them into the esc in a different order will help that. If motor turns wrong way after do so, use the Castle Link to reverse the motor rotation and get it going the right way again.
#3
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Ann Arbor,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: E-Maxx with XO-1 electronics with telemetry
Thanks I will try that because I did flip during testing one day and it slid on the motor wire but it just scratched the castle name off one. Close call
#5
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Ann Arbor,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: E-Maxx with XO-1 electronics with telemetry
I don't know but I be mashing the e-revo brushless edition. At like half throttle it can hit around 60 then the tires can't take anymore speed.
But it's ridiculous and runs really cool. I love it
But it's ridiculous and runs really cool. I love it
#7
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Ann Arbor,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: E-Maxx with XO-1 electronics with telemetry
It bumps the shocks in the revo and summit that's why I chose the emaxx. I am pretty sure it's a way but the motor would have to sit higher
#9
Senior Member
My Feedback: (11)
RE: E-Maxx with XO-1 electronics with telemetry
I put a 1520 in my erevo, had the double motor mount and put the motor up front. It really messed up the handling of the truck though. I also had a very close call with my motor wires in that truck and I'll never point them up again. Kershaw has a mount kit for the revo that raises the motor so you can fit long motors like the 1717, 1520 and such but its kinda ugly and I don't like the quality of his stuff. I was going to make a new motor plate that raises the stock mount up a bit, but I had grown tired of the truck and just sold it. My LST handles the power of my 1717 alot better anyway.
#10
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Ann Arbor,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: E-Maxx with XO-1 electronics with telemetry
What is the 1512, is it bigger than the 1717? I have the black can for The XO-1 esc and all the telemetry