Stampede 2wd diff problems
#1
Thread Starter
Join Date: Feb 2017
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Stampede 2wd diff problems
Hey there, having problems with my pede. Just got done rebuilding the diff due to some blown planetary gears. I've done this several times before, as this particular rig started off as a first gen stampede, and have never had a problem. This time I decided to add some MIP X-duty CVDs. Prior to attaching the cvds to output shafts on the diff it was spinning fine. After adding the cvds I'm getting some very serious binding. Getting zero counter rotation. Everything feels super tight. I feel like I'm missing something here as this should have been a fairly straight forward and routine build for me.
On a side note, I'm also having some difficult issues with my Merv rear end and I'm starting to get pretty irritated with these Traxxas diffs.
On a side note, I'm also having some difficult issues with my Merv rear end and I'm starting to get pretty irritated with these Traxxas diffs.