picco 26max tunning.
#1
Member
Thread Starter
Join Date: Apr 2006
Location: beer sheva, NY
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
picco 26max tunning.
Someone who his picco 26max works good on his revo can give me his tuning setting?
of all the needles plz.
And this pipe is good for my picco http://www2.towerhobbies.com/cgi-bin...?&I=LXLPR2&P=7
or this one http://www2.towerhobbies.com/cgi-bin...&I=LXKAJ6&P=ML
I mean what is better for PICCO 26MAX???
thx
Amit
of all the needles plz.
And this pipe is good for my picco http://www2.towerhobbies.com/cgi-bin...?&I=LXLPR2&P=7
or this one http://www2.towerhobbies.com/cgi-bin...&I=LXKAJ6&P=ML
I mean what is better for PICCO 26MAX???
thx
Amit
#3
Senior Member
My Feedback: (1)
Join Date: Aug 2005
Location: Grovetown, GA
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
RE: picco 26max tunning.
Needle settings....sorry, that's part of learning to tune. My settings down here in Georgia, probably wouldn't be worth squat up there where you are....besides there are too many variables....glo plug, fuel, type(nitro and oil content) air cleaner, ambient temp.....it goes on and on, you learn to tune, or you pack it up.....
as for working combos...
http://nitroobsession.proboards79.co...1951711&page=1
Just be sure you have a "hand held" temp gun, none of that on=board bling-bling.
as for working combos...
http://nitroobsession.proboards79.co...1951711&page=1
Just be sure you have a "hand held" temp gun, none of that on=board bling-bling.
#4
Senior Member
Join Date: Feb 2006
Location: Bushkill, PA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
RE: picco 26max tunning.
ether one if those pipes would be fine, I would recomend the trinity pipe because I ran that pipe with my picco .27, picco .26 modded and my O.S. 30 VG, I live close to you so i could help you out on tuneing, on the HSN (high Speed needle) do you have the silver needle or black needle, if you have the silver needle, call up OFNA and ask them to send you a black one. And try a McCOY MC-8 glow plug and see if it runs better, PM me if you need any more help, this is all I ran and held up real good.
#5
Senior Member
Join Date: Feb 2006
Location: Bushkill, PA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
RE: picco 26max tunning.
I forgot in the last post, on HSN i run 4 1/4 turns out and on the LSN I run 2 1/2 turns out with 30% nitro but I wouldnt recomend that fuel
#8
Junior Member
Join Date: Apr 2006
Location: Rapid City ,
SD
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: picco 26max tunning.
Hay Kliff,not to hijack, but I thought the Picco .26 max was a Big block.In the add you postd it said it was a small block and that the BB were the .27s and 28s.Is that correct?
#9
Banned
Join Date: Feb 2006
Location: midland, MI
Posts: 2,666
Likes: 0
Received 0 Likes
on
0 Posts
RE: picco 26max tunning.
the Picco isa SB.. a step up from the Picco 21 it replaced... as far as tuning, even if your my neighbor and we use own identical trucks /fuel ect.. our tuning still may be different strictly due to the differances between each motor, yes even if they are both a Picco 26. bought on same day, broke in at same time and same process.. they may not be different by much, but they will be different non the less.
Timmahh
Timmahh