s-maxx complete front and rear end
#1
Senior Member
Thread Starter
Join Date: Feb 2007
Location: beachwood,
OH
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
s-maxx complete front and rear end
i am making a maxx gasser as a winter project. I need the complete front and rear end and a tranny from a s-maxx. if you know where i can get one please post i link i am going to make a custom chassis or use this one http://www.neweramodels.com/item.cgi...d=&part_id=132
#4
Senior Member
Join Date: Sep 2006
Location: Ft. Pierce,
FL
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
RE: s-maxx complete front and rear end
E-Bay. I looked at the chassis you linked to- I have some input here. I went with this:http://www.neweramodels.com/item.cgi...u&part_id=2140
It's thicker (4.7mm vs. 3.2mm), comes with extended braces, which you'd have to get anyway, and a center skid. It works with stock TRX front and rear skids.
It's thicker (4.7mm vs. 3.2mm), comes with extended braces, which you'd have to get anyway, and a center skid. It works with stock TRX front and rear skids.