pipe t-maxx pipe
 

well im looking for a new pipe for my t-maxx and was wondering what i should get?


my maxx is stock all but the pull start...

RE: pipe t-maxx pipe
 

If you've got the 2.5 Maxx....
http://www2.towerhobbies.com/cgi-bin...?&I=LXFCB5&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LXSP47&P=M
http://www2.towerhobbies.com/cgi-bin...?&I=LXDDU0&P=M

http://i30.photobucket.com/albums/c3...ggy/ross21.jpg
If you've got the earlier .15Pro, you'll need a different header..... If you cant figure out where to get Nylon tie wraps, Indecline099 might remember where.....bbbbwwwwaaaahhaaaaaaaa:D

RE: pipe t-maxx pipe
 

I got the traxxas blue pipe for sale jus put on a ths pipe, nice low end and just about the same highend as the blue traxxas one.

RE: pipe t-maxx pipe
 

so what is the difference between the "traxxas blue" one and the "blue traxxas" one? lol

RE: pipe t-maxx pipe
 

i have the sirrio pipe on my smaxx and it really opened up the 2.5............not the 2.5r i am getting my os 18 this weekend it should really make that motor scream..just my 2cents

RE: pipe t-maxx pipe
 

what would make it wheelie? cuz mine dosent but i also want it to be a good pipe

RE: pipe t-maxx pipe
 

If ya want wheelies....maybe you ought to be thinking OS 18TM, Picco 26Maxx....somethin to kinda help that pipe out a little.

RE: pipe t-maxx pipe
 

i dont have money for a new moter but i will eventualy

RE: pipe t-maxx pipe
 

Man, I've been looking all over this forum for this topic. I have a O.S. .18cv-rx in my T-Maxx. It came with the Pro .15. I have since installed a Associated off-road pipe. It's the blue torque pipe. Is this pipe OK with this engine. Or, should I upgrade to a different pipe and header for the .18 displacement? I just don't think the .12-.15 pipe is sufficient. Would drilling the stinger make a difference?

RE: pipe t-maxx pipe
 

i use this one. really helped out the stock 2.5, but really helps the Ofna 26MAXX. [link=http://cgi.ebay.com/T-Maxx-WORKS-Racing-Tuned-Pipe-RPM-Torque-FANTOM-20021_W0QQitemZ6037218500QQcategoryZ44028QQssPageN ameZWDVWQQrdZ1QQcmdZViewItem]Fantom pipe[/link]

RE: pipe t-maxx pipe
 

I use this.... https://secure.handzon.com/itechapp/.../?pageid=28221

RE: pipe t-maxx pipe
 

that pipe looks like you could stuff some weed in there and smoke it:D

RE: pipe t-maxx pipe
 

I have the T-Maxx that came with a PRO .15. THese pipes fit the 2.5s. NO good to me.

RE: pipe t-maxx pipe
 

so you think i should just get the blue tuned pipe from traxxas for my stock trx 2.5?

RE: pipe t-maxx pipe
 

Go with the ASSOCIATED TORQUE pipe and the DURATRAX big tube header. you can get both at www.towerhobbies.com

RE: pipe t-maxx pipe
 

I have the THS racing pipe and that gives me wheelies.

RE: pipe t-maxx pipe
 

Which header is it? Part # if you possibly have it. I can't seem to find one shaped properly to fit the T-Maxx on Tower's site. I do already have the torque pipe. Thanks.

Never mind, I just found it. Thanks anyway. http://www2.towerhobbies.com/cgi-bin...?&I=LXAXN1&P=7

RE: pipe t-maxx pipe
 

By the way. Is this larger than the original blue T-Maxx header? From the pic it looks about the same. Thanks again.

RE: pipe t-maxx pipe
 

hmm i dont think so. but if u have the long assocciated pipe (the one with the stinger at the end) it will not fit unless u cut some of the header or pipe off. Or you could get a little hanger so the pipe hangs up a little bit. This was u can use the long pipe and not have to cut anything. this is what i did:

http://img50.imageshack.us/img50/1171/img03501ac.jpg

RE: pipe t-maxx pipe
 

Mine is set up almost identical to that now. My pipe is blue and doesn't have the hanger mount at the tip. How does yours do? I am still breaking in my .18CV-RX, so I'm haven't seen the full potential of the engine yet. Thanks for the help.

RE: pipe t-maxx pipe
 

ok, so what pipe is made for the 3.3 or will a 2.5 tuned one do just fine? I think i heard of ppl getting the phantom for their 3.3....where can i find one?

RE: pipe t-maxx pipe
 

GOOGLE.com

RE: pipe t-maxx pipe
 

Are you selling the traxxas blue pipe? How much?

RE: pipe t-maxx pipe
 

$26 shipped comes with the pipe hangar but not the grub screw.

RE: pipe t-maxx pipe
 

What's the grub screw? Can you use the stock header with this pipe?