4 motor ugly Stik
#1
Member
Thread Starter
Join Date: Mar 2010
Location: utica,
NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
4 motor ugly Stik
.40-size Easy Stik Series ARF from valuehobby
4 2212 930KV motors 4-20 Amp ESC'S running on a 4000mah 4 cell
with differential thrust useing 8x6 apc props
4 2212 930KV motors 4-20 Amp ESC'S running on a 4000mah 4 cell
with differential thrust useing 8x6 apc props
#4
Member
Thread Starter
Join Date: Mar 2010
Location: utica,
NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4 motor ugly Stik
the differential thrust was setup for ground control becausethe tale wheel is not sterilable
have not flown it still building it too cold here in new york to go flying
got to glue the motor mounts on the wing
but its too cold need too open the window so i wont die from the epoxy smell
just stuck the wing on to see what it will look like when done
all the wired up and ready to go
have not flown it still building it too cold here in new york to go flying
got to glue the motor mounts on the wing
but its too cold need too open the window so i wont die from the epoxy smell
just stuck the wing on to see what it will look like when done
all the wired up and ready to go
#5
RE: 4 motor ugly Stik
Should work better than my attempt. All that motor weight up high made it very difficult to fly. Those four .25 motors were heavy and all the weight above the CG by quite a bit made it very heavily loaded.
#6
Member
Thread Starter
Join Date: Mar 2010
Location: utica,
NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4 motor ugly Stik
ORIGINAL: evan-RCU
Should work better than my attempt. All that motor weight up high made it very difficult to fly.
Should work better than my attempt. All that motor weight up high made it very difficult to fly.
have flown a twin but it was a lite foamy
I know its not going roll quick
what was your plane doing that made difficult to fly
and do you have any larger photos of it to post here
I wound like to see more if it
#7
Member
Thread Starter
Join Date: Mar 2010
Location: utica,
NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
#8
Member
Thread Starter
Join Date: Mar 2010
Location: utica,
NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4 motor ugly Stik