KMP B-25 CONSTRUCTION.
#854
Senior Member
My Feedback: (4)
Join Date: Aug 2008
Location: EllinikoAthens, GREECE
Posts: 1,079
Likes: 0
Received 5 Likes
on
5 Posts
RE: KMP B-25 CONSTRUCTION.
Modded the tail to have two elevator servos (one for each for redundancy), used D-MG16 mini servos
Used ball links for smoother operation
.
Used ball links for smoother operation
.
#855
Senior Member
My Feedback: (4)
Join Date: Aug 2008
Location: EllinikoAthens, GREECE
Posts: 1,079
Likes: 0
Received 5 Likes
on
5 Posts
RE: KMP B-25 CONSTRUCTION.
Next problem to solve is the front gear that hits the servo mount when retracted
I searched the thread and saw that some people had to cut off part of the ply mount [link=http://www.rcuniverse.com/forum/fb.asp?m=2970034]link 1[/link], [link=http://www.rcuniverse.com/forum/fb.asp?m=5198734]link 2[/link]
Any suggestions?
I searched the thread and saw that some people had to cut off part of the ply mount [link=http://www.rcuniverse.com/forum/fb.asp?m=2970034]link 1[/link], [link=http://www.rcuniverse.com/forum/fb.asp?m=5198734]link 2[/link]
Any suggestions?
#856
Senior Member
My Feedback: (4)
Join Date: Aug 2008
Location: EllinikoAthens, GREECE
Posts: 1,079
Likes: 0
Received 5 Likes
on
5 Posts
RE: KMP B-25 CONSTRUCTION.
Had to chop some of the front retract mount for the wheel to retract properly.
Also copied the rubber band trick to keep the pull-pull wires out of the way
Also copied the rubber band trick to keep the pull-pull wires out of the way
#858
Senior Member
My Feedback: (4)
Join Date: Aug 2008
Location: EllinikoAthens, GREECE
Posts: 1,079
Likes: 0
Received 5 Likes
on
5 Posts
RE: KMP B-25 CONSTRUCTION.
Maiden time!
The ASP 80 4-stroke engines had been tuned and sync'ed using channel 7 on tx and mix with ch 3. The sync is near-perfect with only 150-200 rpm difference across the various throttle positions.
The plane flies great, like its on tracks. Needs plenty of rudder for turns. The engine harmonics when in tune is a real crowd pleaser
Landing also easy no bad habits just a 1/4 throttle until touch down, no flaps needed.
Very happy, got a great deal on this plane, it did need some work but the result is worth it!
Pics:
The ASP 80 4-stroke engines had been tuned and sync'ed using channel 7 on tx and mix with ch 3. The sync is near-perfect with only 150-200 rpm difference across the various throttle positions.
The plane flies great, like its on tracks. Needs plenty of rudder for turns. The engine harmonics when in tune is a real crowd pleaser
Landing also easy no bad habits just a 1/4 throttle until touch down, no flaps needed.
Very happy, got a great deal on this plane, it did need some work but the result is worth it!
Pics: