texasboyjmb

I know what your thinking this guys crazy,(well maybe ) but i been considering doing this project for a long time now, and i know you guys can help me. I want to make a set of inline skates that is powered buy two rc motors fast enouph to get at least 40 mph, if did some resarch on the diffrent motors and thought rc motors would be the best way to go but i have no exprience with rc motors .

this is my plan so for i want to use this motorhttp://www.hobbyking.com/hobbyking/s...er_1180kv.htmlsome a123 batteries, the esc was my biggest concern any one know if tis better for me to build my own(and can tell me how), or should i just buy one, which would be a good onehttp://www.hobbyking.com/hobbyking/s..._200A_ESC.html. Also what about thehttp://www.hobbyking.com/hobbyking/s...arehouse_.htmlfor the controler.

thanks for the help


i have to go to class but i will finsh up once im out.













or http://www.hobbyking.com/hobbyking/s...er_1600KV.htmlfor the motor it will save me a little bit and should still get me good power