Century Jet Retracts, Newbie !!
01-24-2007, 10:02 PM
#1
Thread Starter
Join Date: Dec 2002
Location: Creighton, SK. Canada
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Century Jet Retracts, Newbie !!
Hello all,
I've recently purchased a set of Used Century Jet Retracts specifically for a TF Sea Fury. I've yet to charge them up to check for their operation.
I noticed there is a little play in the hinge(up position), more on one than the other. Will this be acceptable and/or could I tighten up something inside.
I also noticed that one of the stock screws were replaced with a hex screw, where could I get a replacement screw.
I'll check within the forums on how to charge up the cylinder.
Thanks
I've recently purchased a set of Used Century Jet Retracts specifically for a TF Sea Fury. I've yet to charge them up to check for their operation.
I noticed there is a little play in the hinge(up position), more on one than the other. Will this be acceptable and/or could I tighten up something inside.
I also noticed that one of the stock screws were replaced with a hex screw, where could I get a replacement screw.
I'll check within the forums on how to charge up the cylinder.
Thanks
01-24-2007, 10:28 PM
#2
RE: Century Jet Retracts, Newbie !!
Support and satisfaction with CJM is inconsistant
Read some of these
http://www.rcuniverse.com/forum/sear...mitbutton=+OK+
Read some of these
http://www.rcuniverse.com/forum/sear...mitbutton=+OK+
