4D planes? Should they be over 6oz?
04-27-2008, 07:02 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2007
Location: sparta, NJ
Posts: 1,356
Likes: 0
Received 0 Likes
on
0 Posts
4D planes? Should they be over 6oz?
Will a 6oz plane work with I guess a heaver prop system like used for 4D? These are my lightweight planes. Thanks Ron
10-18-2008, 09:13 PM
#2
Senior Member
My Feedback: (1)
Join Date: Nov 2007
Location: CDA,
ID
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4D planes? Should they be over 6oz?
Well...you really shouldn't put one on the BUG because it's built to be a SLOW LIGHT plane. And VPP is pretty heavy. I would only recomend VPP for about a 9-12 oz plane. And by the way, do you have any more pix or some vids of your bug? I'm thinking of getting one> 
10-19-2008, 06:28 AM
#3
Senior Member
Thread Starter
Join Date: Feb 2007
Location: sparta, NJ
Posts: 1,356
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4D planes? Should they be over 6oz?
Bug is really a great almost indestructible plane. Great for learning and advanced. Here is my new blue one. Ron
10-19-2008, 05:00 PM
#4
Senior Member
My Feedback: (1)
Join Date: Nov 2007
Location: CDA,
ID
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4D planes? Should they be over 6oz?
Cool, thanks for the quick reply (I was almost certain this thread was "dead"). I'll probably be ordering a blue BUG some time this week. I'll try and post some pix. 
Are there any mods or tips you would recommend for this plane?
Are there any mods or tips you would recommend for this plane?
09-11-2009, 10:32 AM
#6
My Feedback: (19)
Join Date: Apr 2002
Location: Aventura,
FL
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4D planes? Should they be over 6oz?
I'm in process of building 17oz airplane with the VVP. Its the Aeroworks 260 EP 3D. i hope it will work well........
Axi 2212/34 EVP with Jeti advance plus 30-3p and 1500mah 3cell batt.
Axi 2212/34 EVP with Jeti advance plus 30-3p and 1500mah 3cell batt.
