Walkera Master cp Parts
01-09-2013, 01:59 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: MorgantownPA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Walkera Master cp Parts
I just purchased a Walkera Master cp ,Im having a hard time trying to find parts. Im wondering if i made a poor choice . Can anyone help me find parts here in the U.S.
03-16-2014, 08:17 PM
#3
Junior Member
Join Date: Jan 2014
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
For Walkera parts in the US, you should check WowHobbies - USA Walkera Distributor, Align Super Depot, E-flite Specialists, Turbo Ace Exclusive Distributor.
07-17-2014, 08:09 AM
#4
Join Date: Jun 2008
Location: Smithtown,
NY
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
08-13-2014, 08:42 PM
#5
Junior Member
Join Date: Jan 2014
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I've been getting most of my Walkera parts, for Master CP and Genius CP, from eBay sellers; "emilyandlily", "ujtoys", and "walkera-esky" (also known as "RCCarMax" direct internet store). Also BangGood has a good selection and great prices, if you can wait for shipments from China. I'll recommend all of these.
And I have accumulated considerable experience in ordering replacement parts and installing - thank Walkera for making Master CP parts affordable and fairly easily replaced.
As for WOW hobbies, I have second thoughts. I think they may have sent me a Master CP, supposedly 'checked out', that had a stripped servo - but since I was completely new to CP helis, it took me months to realize what MAY have been my initial problem. (With training gear attached, it tilted to the right BEFORE I could make lift-off, until the blades made ground contact due to the tilt - even with heavy left aileron input, and with a curious ticky-ticky sound from a servo without any command input whenever the battery was connected. With all the warnings on the forums that CP was TOTALLY different than FP, I just thought I was doing something wrong. Finally replaced all three servos and the heli behaved as I expected from my FP experience - except a lot more sensitive and fast. Removed the training gear when the heli started oscillating with increasing amplitude in a hover without any control input.) But I have no proof, so don't rule out WOW hobbies on my suspicions, just comparison shop the prices from all these sources.
And I have accumulated considerable experience in ordering replacement parts and installing - thank Walkera for making Master CP parts affordable and fairly easily replaced.
As for WOW hobbies, I have second thoughts. I think they may have sent me a Master CP, supposedly 'checked out', that had a stripped servo - but since I was completely new to CP helis, it took me months to realize what MAY have been my initial problem. (With training gear attached, it tilted to the right BEFORE I could make lift-off, until the blades made ground contact due to the tilt - even with heavy left aileron input, and with a curious ticky-ticky sound from a servo without any command input whenever the battery was connected. With all the warnings on the forums that CP was TOTALLY different than FP, I just thought I was doing something wrong. Finally replaced all three servos and the heli behaved as I expected from my FP experience - except a lot more sensitive and fast. Removed the training gear when the heli started oscillating with increasing amplitude in a hover without any control input.) But I have no proof, so don't rule out WOW hobbies on my suspicions, just comparison shop the prices from all these sources.
