115FZ Crank re assembly
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Location: London, UNITED KINGDOM
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
115FZ Crank re assembly
I am having touble getting the crankshaft back in the crankcase, I can not seem to get the crank ring into the housing and have cracked one trying.
Is ther a special tool required?
Is ther a special tool required?
#3
RE: 115FZ Crank re assembly
I had the same problem with a 70. I finally put a nylon wire wrap around ( shuved it down one side until it came out the other - cylinder off ) the ring and compressed it while I pushed it in. One of the official guys said that the camfer is sufficeint just to press the crank in on the 115 ? But there should also be room to put something around the ring to compress it while you push the crank in.
#4
Junior Member
Thread Starter
Join Date: Sep 2010
Location: London, UNITED KINGDOM
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: 115FZ Crank re assembly
Thanks Four Stroker for such a simple obvious solution, I have to say there is not much sign of any chamfer in my crankcase
I will let you know how I get on whn I get the new ring
I will let you know how I get on whn I get the new ring