YS - 120 F set up & Operating Instructions
03-19-2010, 12:40 PM
#1
Thread Starter
Join Date: Jan 2008
Location: Yuma, AZ
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
YS - 120 F set up & Operating Instructions
YS-120 F Set Up, Tuning, Operating Instructions
I have a YS-120F and have lost the operating instructions. I muddled around and finally got it running, but it seems rich at the low end and has an unreliable idle....seems to load up and die.
Can you please help by publishing the operating and set up instructions??
Many Thanks.
Russ V.
I have a YS-120F and have lost the operating instructions. I muddled around and finally got it running, but it seems rich at the low end and has an unreliable idle....seems to load up and die.
Can you please help by publishing the operating and set up instructions??
Many Thanks.
Russ V.
03-19-2010, 06:18 PM
#5
RE: YS - 120 F set up & Operating Instructions
ORIGINAL: R Verbael
YS-120 F Set Up, Tuning, Operating Instructions
I have a YS-120F and have lost the operating instructions. I muddled around and finally got it running, but it seems rich at the low end and has an unreliable idle....seems to load up and die.
Can you please help by publishing the operating and set up instructions??
Many Thanks.
Russ V.
YS-120 F Set Up, Tuning, Operating Instructions
I have a YS-120F and have lost the operating instructions. I muddled around and finally got it running, but it seems rich at the low end and has an unreliable idle....seems to load up and die.
Can you please help by publishing the operating and set up instructions??
Many Thanks.
Russ V.
The manual is in your e-mail. Also, if you want a good page on seting up your series of YS I really like:
http://www.julton.net/Fact%20Sheet%20YS%20Engines.html
03-19-2010, 11:34 PM
#6
Thread Starter
Join Date: Jan 2008
Location: Yuma, AZ
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: YS - 120 F set up & Operating Instructions
Thanks to you guys VERY MUCH for the legwork and expertise.
Truly appreciated.
Russ V. [8D]
PS The engine stand worked out just right and the YS is now installed in an airplane!!
Truly appreciated.
Russ V. [8D]
PS The engine stand worked out just right and the YS is now installed in an airplane!!
04-01-2010, 09:51 AM
#8
Junior Member
Join Date: Sep 2005
Location: Freeport, IL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
RE: YS - 120 F set up & Operating Instructions
Hi guys! I was wondering if you could send me the YS 1.20 Manual as well. It would be great! Please save me!!
Thanks
Troy
Thanks
Troy
09-25-2011, 07:29 AM
#12
Junior Member
Join Date: Jan 2006
Location: Rosedale, IN
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: YS - 120 F set up & Operating Instructions
Hello 
If this double posts I apologize. I am having problems with RCU for some reason today :P
I just picked up an older YAK-54. It has on it a YS F 120. I am trying to track down a manual and see if there are still parts out there available for the motor. It is currently propped at 15x6. I will have to see if she runs. Any ideas/suggestions appreciated.
Thanks
Brandon
If this double posts I apologize. I am having problems with RCU for some reason today :P
I just picked up an older YAK-54. It has on it a YS F 120. I am trying to track down a manual and see if there are still parts out there available for the motor. It is currently propped at 15x6. I will have to see if she runs. Any ideas/suggestions appreciated.
Thanks
Brandon
10-27-2012, 02:29 PM
#14
Junior Member
My Feedback: (2)
Join Date: Jun 2011
Location: Geneva,
IL
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: YS - 120 F set up & Operating Instructions
I have a YS 120F and would appreciate the operating maual in PDF formatt. I am going to bench test this enfine before I buy it. Do you happen to know when the YS 120f series was made? Do these older engines put out as much power as some of the newer 120 size engines? I plan to put tjis engine in a Great Planes Sterman 120.
Thanks
[email protected]
Thanks
[email protected]
10-28-2012, 05:36 AM
#15
RE: YS - 120 F set up & Operating Instructions
Manual was just emailed to you.
The FS has been out of production a while, not sure of the years it was produced. The good news is that as long as the case is not damaged the parts are all replaceable.
The YS uses a forced induction set up and will make more power than other brands of the same displacement that are not supercharged.
The FS has been out of production a while, not sure of the years it was produced. The good news is that as long as the case is not damaged the parts are all replaceable.
The YS uses a forced induction set up and will make more power than other brands of the same displacement that are not supercharged.
07-23-2017, 02:00 AM
#16
My Feedback: (3)
Join Date: Apr 2009
Location: TusketNova Scotia, CANADA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Just inherited a YS F-120 without manual. Any chance you could email me a PDF copy of the manual. Engine is running but I don't think it is up to its full potential. Thanks Jim
10-25-2017, 04:51 AM
#17
Member
Join Date: Apr 2006
Location: white cloud,
MI
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
ys-120
thx jim
05-15-2018, 01:55 PM
#20
Join Date: Oct 2006
Location: Kingman,
AZ
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I was just given a YS f-120 supercharged engine and a nice Goldberg Ultimate 300 that needs a little work. Got the box for the engine but it just had the original muffler and a wrench. No Manual. If anyone has the manual in PDF form and could send it to me would be greatly appreciated. Looks like it has had very little run time, but has been sitting a long time.
Bob
PM me and I will send you my E-mail
Thanks
Bob
PM me and I will send you my E-mail
Thanks
