ZDZ 80 rv tuning
07-10-2006, 06:33 PM
#1
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Apr 2003
Location: Churchville,
PA
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
ZDZ 80 rv tuning
I have a zdz80 on a KS89 can,swinging a mejzlick 26x10,engine has 5 gallons of mobile mx2t @ 32:1 and now running mobil @ 40:1. The engines mid range on the throttle sags a bit,when I get into a hover or rolling harriers you have to keep the throttle at the top end of the stick for good transition but thats to much throttle.Is there any way to get a smooth mid range for better 3d flying?
07-11-2006, 10:45 AM
#2
Senior Member
Join Date: Jul 2002
Location: MD
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
RE: ZDZ 80 rv tuning
You need to go with a longer header length to soften the midrange. Typical setup should have at least a 12" header.
Even still a tuned setup will be finicky.
Thanks
Even still a tuned setup will be finicky.
Thanks
07-12-2006, 06:27 PM
#3
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Apr 2003
Location: Churchville,
PA
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
RE: ZDZ 80 rv tuning
Mike, the header is atleast 12" long by the time it wraps around under the belly,it's set up on the H9 sukhoi. I guess what I asking is if I adjust the timing will that help any? If so which way do I move the sensor and or adjust the needles? Pretty much everything is still factory set.
