Breaking in 215 radial?
03-11-2007, 05:59 PM
#1
Thread Starter
My Feedback: (22)
Join Date: Jun 2003
Location: Sun City West, AZ
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Breaking in 215 radial?
I'm in the process of running in my 215 radial. I'm using Lawn Boy ashless for breakin at 30-1 then want to change to synthetic. what is a good oil? Thinking of Bel-Ray or Amsoil Saber. I already have two gallons through the engine, when should I change to Syn?
I have been watching the cyclinder head temp. It runs 220 to 240 at full throttle them back to 190-200 at mid speeds. Is his OK?
Engine starts within few flips and has good power. I'm getting 4800 rpm on a 3W 32-12 prop
Thanks Danny
I have been watching the cyclinder head temp. It runs 220 to 240 at full throttle them back to 190-200 at mid speeds. Is his OK?
Engine starts within few flips and has good power. I'm getting 4800 rpm on a 3W 32-12 prop
Thanks Danny
03-12-2007, 11:39 AM
#2
Senior Member
Join Date: Jul 2002
Location: MD
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
RE: Breaking in 215 radial?
Danny,
YIKES!! Get off of the non synthetic Lawn Boy ASAP!!!
Go with Yamalube 2S or Honda HP2 at 32:1 for the life of the engine! You should never run a totally non synthetic, especially Lawn Boy Ashless through the RCS 215 or any RCS radial!
Engine temp and prop selection is fine.
Thanks,
YIKES!! Get off of the non synthetic Lawn Boy ASAP!!!
Go with Yamalube 2S or Honda HP2 at 32:1 for the life of the engine! You should never run a totally non synthetic, especially Lawn Boy Ashless through the RCS 215 or any RCS radial!
Engine temp and prop selection is fine.
Thanks,
