- Optimized operating software
When charging or
discharging, BC6 has an 'AUTO' function that sets the feeding current or the
cell count of Lithium battery automatically.
Especially for Lithium batteries, it can prevent the
over-charging can lead to an explosion by users fault. Every program in the
unit is controlled
with mutual links and communication
for every possible error so it introduces a maximum safety. These can be set at
- Dual input
BC6 employs the
circuit that can be operated with the input power of AC(Alternating Current) or
For AC input, it contains a AC-DC
switching power supplier which has 5A of power capacity and maximum output
power of 50Watts for charging.
As a result it can charge up to 16
cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of
voltage balancer for Lithium batteries inside
BC6 has an
individual-cell-voltage balancer inside. So it does not need any balancer
separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage
individual cells on discharge
BC6 also can
monitor and balance individual cells of the Lithium battery pack during the
discharge process. If the voltage of any one cell varies abnormally, the
process will be stopped with the error message.
- Accept various
types of Lithium battery
BC6 can accept three
types of Lithium batteries - LiIo, LiPo and LiFe. They have different
characteristics by their chemistry. You can select any one of them that you are
going to process before the job.
- Lithium battery
'Fast' and 'Storage' mode
You can charge
Lithium battery for special purposes. 'Fast' charge reduces the charging time
of Lithium battery and 'Storage mode controls the final voltage of the battery
to be suit for long time storage.
convenience it can store maximum 5 data of different batteries. You can
establish the data contains program setting of the battery to charge or
discharge continually. These data can be called out at any time you need and
the process can be executed without program setting.
Perform 1 to 5
cycles of charge>discharge or discharge>charge continually for battery
refreshing and balancing.
- PC based
analysis using USB communication
expert, BC6 offers PC based program can analysis the characteristic of the
battery by USB port. It shows a graph of voltage, current, capacity and
temperature curves. It also shows the individual voltage of each cell in the
Lithium battery pack.
- Robust outer
High-quality aluminum case
is durable and very efficient to cool out the internal heat