|Charge-and-Fly for the 3D Guy |
|Product Type:||Airplane - RTF|
|Product:||Typhoon 2 3D RTF|
|Speed Controller:||E-flite 25A brushless |
|Batteries:||3-cell 1800mAh Li-Po|
|Phone Orders:|| ||
|ParkZone’s Charge-and-Fly™ Typhoon™ 2 3D is for experienced RC pilots who want the thrills of unlimited action in an electric park flyer without the hassles of building one. Equipped with oversized control surfaces and a powerful ParkZone™ BL400-15T brushless motor, it can perform the most aggressive 3D maneuvers imaginable with laser precision and power to spare. Hovers, harriers, torque-rolls, waterfalls—the Typhoon 2 does them all. The removable Side Force Generators™ can be attached with just eight screws. And because the wings and fuselage are molded from ParkZone’s super-strong, feather-light Z-Foam™ material, it can handle the punishment of these high-energy 3D aerobatics without getting bent out of shape.
Getting the Typhoon 2 airborne is about as simple as it gets. Everything you need is in one box. Just attach the wing, tail and landing gear, charge up the included Li-Po battery pack and in as little as 40 minutes, you’re flying. Once in the air you can choose between Low and High Rate with a flip of the transmitter switch.
ParkZone Typhoon 2 3D Specifications
Wingspan: 39.4 in (1000mm)
Overall Length: 36.6 in (935mm)
Flying Weight: 26 oz (740 g)
Motor Size: BL400-15T brushless, gear reduced (installed)
Radio: 4-channel FM proportional ZX10 (included)
Servos: 3-wire digital servos (installed)
Speed Control: E-flite 25A brushless ((EFLA1025) (included)
Recommended Battery: 3-cell 1800mAh Li-Po battery (included)
Item #: PKZ4300
Remember to mention that you saw it on RCUniverse.com!
|Do you have a new product to introduce? Contact us to see about getting your new product in RCUniverse's New Product section!|