|Display Your Completely Assembled Airplane With Pride & Joy! |
|Manufacturer:||Pro-Built Models |
|Product:||HANG-A-PLANE Airplane & Helicopter Hangers|
|Ready to use:||Units come in three ready sizes|
|Hardware Included:||Mounting Eye Bolts & Screw Eyes|
|Free Shipping Offer:||Free Shipping Offer Details In Ad.|
|Street Price:||15.95 Small 19.95 Medium|
|Phone Orders:||928.202.7536|| ||
|HANG-A-PLANE ® airplane cradles not only keep your planes up and out of the way of damage but they also display them in full view with the wings attached! Other units store your planes safely but require the wings to be detached, have a complicated rope and pulley systems or multiple mounting screws and require permanent mounting to the wall or ceiling. With a HANG-A-PLANE ® you can keep them safely assembled and show them off too! Just one eyebolt screwed into a ceiling or wall stud for your large planes or use the included butterfly bolt for mounting through drywall ceilings or walls. HANG-A-PLANE ® can be used to safely display your pride and joy inside your home as well. Now you can keep your favorite planes and helicopters in the living room, bed room, or office and in a climate and humidity controlled area. Keep them safe and display your planes with pride!|
Small- $15.95 + $10.50 shipping for Park Flyers and planes up to 5 Lbs. with a wing cord of 8”or less.
Medium- $19.95 + $14.50 shipping for planes up to 25 Lbs. (.40 to 1.80 engine size).
Large - $29.95 + $14.50 shipping for planes up to 35 Lbs. Giant Scale Gassers etc.
Custom $34.95 + Call for Shipping $ for planes up to 50 Lbs. Custom-made to the specifications you order.
| All cradles are made from heavy gage aluminum or steel depending on size and are fully adjustable to fit your planes fuselage width and wing cord depth. Accommodates all wing styles, high, mid, low, biplanes, or rotary with or without the landing gear attached to the wing. Units can be used to weigh and balance your planes without damage.
Hangers are fully adjustable and come completely assembled with vinyl tubing and end caps to cushion and help protect your baby’s wing from rash. All the hardware is included to hang from your ceiling or wall. Included are two Eye Bolts. One is for screwing directly into a ceiling or wall stud and also for your heaver models. The butterfly bolt with washers is for mounting from a drywall ceiling or wall for models up to 12 Lbs. and when finding a stud is just inconvenient or in the wrong place!
Fully illustrated instructions are included for fool-proof mounting and adjusting and includes CG balancing instructions with rubber balancing adapters.
For custom-made fit, please specify your planes weight, the distance straight up from the bottom of the wing at the CG to the height of the rudder, (for the ceiling to rudder clearance), the width of fuselage and depth of wing cord (front to back of wing). A hanger will be custom made to your specifications!
Large sizes require special shipping charges due to size & weight of box. Free shipping available on multiple orders of six or more units.
Bank Cards & Credit Cards accepted using PayPal. Please don't hesitate to e-mail firstname.lastname@example.org with any questions.
Remember to mention that you saw it on RCUniverse.com!
|Do you have a new product to introduce? Contact us to see about getting your new product in RCUniverse's New Product section!|