|Hobbywing Xerun 3656SD KV4000 Sensored Motor & SCT PRO 120A |
|Product Type:||Electric Motor|
|Product:||XERUN 3656SD KV4000 Sensored Motor & SCT PRO 120A ESC Combo|
|Cont. Burst Current:||120A / 760A|
|Suitable Model:||1/10 and 1/8 Scale Truggy or Buggy|
|Phone Orders:|| ||
Model: XERUN 3656SD KV4000 Sensored Brushless Motor
Rotational Speed: 4000 KV
Motor Dimensions (Diameter x Length): 36mm x 56mm
Shaft Dimensions (Diameter x Length): 5mm x 18.5mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model 1/10 Car
Dimension: 53.5mm(L) x 36mm(W) x 36mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0004 ohm
Motor Turns: (2S Lipo: KV<=6000) / (3S Lipo: KV<=4000) / (4S Lipo: KV<=3000)
Battery: 6-12 cells NiMH / NiCd or 2-4S Li-Po
BEC Output: 6V/3A Built-in BEC
Cooling Fan Working Voltage: Working under 6V
Net Weight: 99g
Suitable Model: 1/10 and 1/8 Scale Truggy or Buggy
Suitable for 1/10 and 1/8 scale short course trucks and 1/8 scale buggies.
Compatible with sensored and sensorless brushless motors, with the best control feelings.
The built-in switching mode BEC has a powerful output to supply all electronic equipments even with 4S Lipo input.
Excellent start-up, acceleration and linearity.
Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Easily programmed with only one button and compatible with pocket-sized program card (Optional equipment) and the advanced LCD Program Box (Optional equipment).
ESC firmware can be updated through an USB adapter on the LCD Program Box (Optional equipment).
Splash proof and dust proof.
Program Card Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC, it works in the following 2 ways:
1. Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD screen.
2. Working as an USD adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.
Program Card Specifications
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC HOBBYWING / TEKMODEL
The programmable item for the CAR ESC are:
1. Running Mode
2. Drag Brake Force
3. Low Voltage Cut-Off Threshold
4. Start Mode
5. Maximum Brake Force
6. Maximum Reverse Force
7. Initial Brake Force
8. Throttle Neutral Range
10. Over-Heat Protection
11. Motor Rotation
12. Lipo Cells
Remember to mention that you saw it on RCUniverse.com!
|Do you have a new product to introduce? Contact us to see about getting your new product in RCUniverse's New Product section!|