|Lobster, The Servo Station
Multiple servos to a single port
Very often a Y harness is used to connect multiple servos to a single
channel. A major problem with this type of installation is a drop in voltage.
The servo station allows you to connect up to 4 HV servos to a single
channel without any drop in voltage.
Selectable servo voltage
The servo station supplies 3 types of output voltage. 5V for gas engine
ignitions, 6V standard servos & 7.4V HV servos Variable voltages eliminate
the need for external B.E.C's.
Separate voltage setting for each output
Dual battery ports
Dual battery support with built in battery share circuit to supply plenty
of power to multiple servos
during heavy operation.
Amplified Receiver signal
When servos are mounted far from the receiver the signal can be weakened
due to resistance
from the use of long servo extensions. The servo station amplifying signal
circuit solves this problem.