Notice: This version of the RCU Marketplace is no longer accepting new listings.
We have a brand new, easy to use RCU Marketplace
Come take a look. On April 5, 2018, once all existing listings have expired, the old marketplace will close for good. In the meantime, feel free to browse what is for sale here, but please make any new for-sale or trade listing in the new Marketplace!
Texas RC Planes Drastic giant aerobat RX ready Up for sale is a Texas RC Drastic. Complete with all Hitec servos, MPi switch/fueler, and a VVRC Valley View RC 30cc twin. Airframe is in great condition, engine looks new, all ready for your RX and battery.
From Texas RC Planes
Drastic ARF $349.99 HAS FLAPS, 2 PEICE WING AND YOUR CHOICE OF TAIL DRAGGER OR TRICYCLE GEAR (ALL INCLUDED IN BOX) OVER SIZE SHIPPING. 57X21X12 BOX SIZE SHIPS AS 68 LBS. DIMENTAL WGT
Fuselage- Lite ply construction with lighting holes to save weight, Servo tray is installed and is located under the wing (1 servo for throttle, 1 servo for rudder ). Rudder is pull-pull system and only requires 1 servo. Requires 2 servos for the elevator halves and are mounted in the outside of the fuselage near and below the elevator halves. Firewall measures 4 1/2 wide and 5 tall. Landing gear attaches 7 back from firewall and uses 4 screws. Fuselage has a hatch located between wing and firewall with a spring loaded latch that lets you service the fuel tank (or batteries if you are using electric power)
Wing- 2 1/2 inches thick, 18 1/4 cord, symmetrical design, built up balsa design. has alum. wing tube joiner to make a 2 piece wing for easy transport.. Uses 2 aileron (1 under each wing half). Ailerons are 28 1/4 by 3 3/4 each. Uses 2 flap servos.
Tail Feathers - Flat (no airfoil and epoxies to fuselage) 10 1/8 cord including elevator halves. Horizontal stab. is 23 1/2 on leading edge tapering to 29 1/4 at rear (with elevator halves installed). Elevator halves are 11 by 4 each. Vertical stab. is 10 1/4 tall and 11 long tapering to 3 inches at the top (rudder not included). Rudder is 11 1/2 tall. Rudder is 5 inches at the bottom tapering to 2 1/5 inches at the top.
Recommended Throws- 45 deg. (up and down) for all surfaces
Plane weighs 7 lb. 3oz. with all hardware
Wingspan: 78 inches
Wingarea: 1349 sq. in.
Length: 68 inches
Engine: 2C 1.20 cu.in;26cc gas engine
Radio: 5 Channels; 8 Servos
From Valley View RC 30cc twin $349.99 Smooth operation, Smaller size With the RCGF 30cc twin you can get a smoother flying experience. It's small, powerful and easy to start. It's a very good choice for small size twin cylinder engine.
RCGF 30cc T Specifications: Piston displacement Cylinder (cc) : 30cc (1.83 cu in) Bore x Stroke (mm): 1.26 in(32mm) x 0.77 in (19.6mm) Carburetor : Walbro Ignition : DC-CDI (Computer Controlled auto advance, electronic ignition system) Power supply: 4.8-8.4V Maximum Output :3.7HP /7500rmp Requires: Gasoline, 2-cycle air cooled oil, ignition battery & propeller speed rang : 1500-8500rpm Gasoline-Version : Pre-mixed Fuel, Recommend:32:1 (87% high otcane unleaded gasoline