This is a New G-62 muffler/mount that I bought years ago and do not need. It has been played with but never run. If you have never heard of these Byron mounts, they allow a large amount of adjustment to the engine forward and aft, as well as rotation. The mount is the muffler and it silences better than the box mufflers and it is reported to increase RPM.
Last login: 12/7/2017 2:14:PM
Location: LA, USA
Overall length is 12.5" Length from mount pad to rear edge is 8.5" Height from outlet pipe to horizontal tube center line is 6.75" Length of vertical tube to the horizontal center line is 4.75" These mounts were used in the 80" Byron P-47 so it should easily fit in the 85" Top Flight. You just need two bulkheads to attach the clamp brackets to.